[{"body":"Hardware Omada SDN Controllers V6.2.14.x Pre-Release Firmware (Released on 18th June, 2026)\n\na week ago - last edited a week ago\n\nTags:\n\nThis Article Applies to\n=======================\n\nOC200(UN)\\_V1\\_1.41.6\\_pre-release (Built-in Omada SDN Controller 6.2.14)\n\nOC200(UN)\\_V2\\_2.26.6\\_pre-release (Built-in Omada SDN Controller 6.2.14)\n\nOC200(UN)\\_V3\\_3.3.6\\_pre-release (Built-in Omada SDN Controller 6.2.14)\n\nOC220(UN)\\_V1\\_1.6.6\\_pre-release (Built-in Omada SDN Controller 6.2.14)\n\nOC220(UN)\\_V2\\_2.5.6\\_pre-release (Built-in Omada SDN Controller 6.2.14)\n\nOC300(UN)\\_V1\\_1.35.6\\_pre-release (Built-in Omada SDN Controller 6.2.14)\n\nOC400(UN)\\_V1\\_1.13.6\\_pre-release (Built-in Omada SDN Controller 6.2.14)\n\nOverview\n========\n\nWe hope to offer you the opportunity to experience the new features added in Controller vv6.2.14.x in advance, and to allow TP-Link to thoroughly test the firmware in your real network environment and across scenarios before the official release. All feedback is welcome, including reports of successful upgrades.\n\nRelease Notes\n=============\n\nVersion Info\n------------\n\nThis version of the Controller is fully compatible with the Omada App version 5.2.x or above.\n\nSupported Device Models\n-----------------------\n\nFor device models Omada Software Controller supports, refer to the **[Omada Cloud SDN Platform Compatibility List](https://www.tp-link.com/en/omada-sdn/product-list/).**\n\n**New Features**\n----------------\n\nThere are no new feature updates compared to Omada Software Controller v6.2.10.\n\n**Enhancements**\n----------------\n\n1. Optimized device authentication and security mechanisms, introduced device-level digital certificates (DAC) and a more secure authentication process (SPAKE2+), and enhanced the security and trustworthiness of device adoption. (Requires firmware support)\n2. Optimized Label functionality, which supports adding labels to name the Gateway port under the Site view > Device List > Gateway > Manage Device > Ports.\n\n**Notes**\n=========\n\n1. Please note that Controllers on different platforms may vary in features, even if their first three digits of the version code are the same. For example, the Linux Controller currently supports Cluster Mode, but the Windows Controller doesn't support it yet.\n2. The Omada SDN Controller can only manage specific devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.\n3. Since version 5.14.32, the Omada Software Controller no longer supports upgrading from Controller v4.\n4. To strengthen overall security, we recommend upgrading all devices to the latest firmware.\n\nFirmware Download\n=================\n\n### **Before the Upgrade**\n\n(1) Please be sure you have read the [Beta Test Agreement](https://community.tp-link.com/en/business/forum/topic/275514) before upgrading the Pre-release firmware!\n\n(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.\n\n(3) You may follow the following guide to upgrade your Omada Controller. **[How to Upgrade or Downgrade Omada SDN Controller](https://community.tp-link.com/en/business/forum/topic/616596).**\n\n### **Firmware Download Link**\n\n**Direct Download**\n\n \n**[OC200(UN)\\_V1\\_1.41.6\\_pre-release (Built-in Omada SDN Controller 6.2.14)](https://static.tp-link.com/upload/beta/2026/202606/20260618/OC200v1_OC200v1_2_un_1.41.6_20260617_rel16244_common_up_2026-06-17_04.31.23.zip)**\n\n**[OC200(UN)\\_V2\\_2.26.6\\_pre-release (Built-in Omada SDN Controller 6.2.14)](https://static.tp-link.com/upload/beta/2026/202606/20260618/OC200v2_un_2.26.6_20260617_rel16255_up_2026-06-17_04.31.28.zip)**\n\n**[OC200(UN)\\_V3\\_3.3.6\\_pre-release (Built-in Omada SDN Controller 6.2.14)](https://static.tp-link.com/upload/beta/2026/202606/20260618/OC200v3_un_3.3.6_20260617_rel15613_up_2026-06-17_04.20.49.zip)**\n\n**[OC220(UN)\\_V1\\_1.6.6\\_pre-release (Built-in Omada SDN Controller 6.2.14)](https://static.tp-link.com/upload/beta/2026/202606/20260618/OC220v1_un_1.6.6_20260617_rel22220_up_2026-06-17_06.11.02.zip)**\n\n**[OC220(UN)\\_V2\\_2.5.6\\_pre-release (Built-in Omada SDN Controller 6.2.14)](https://static.tp-link.com/upload/beta/2026/202606/20260618/OC220v2_un_2.5.6_20260617_rel35075_up_2026-06-17_09.45.20.zip)**\n\n**[OC300(UN)\\_V1\\_1.35.6\\_pre-release (Built-in Omada SDN Controller 6.2.14)](https://static.tp-link.com/upload/beta/2026/202606/20260618/OC300v1_OC300v1_2_un_1.35.6_20260617_rel23313_common_up_2026-06-17_06.29.17.zip)**\n\n**[OC400(UN)\\_V1\\_1.13.6\\_pre-release (Built-in Omada SDN Controller 6.2.14)](https://static.tp-link.com/upload/beta/2026/202606/20260618/OC400v1_OC400v1_2_un_1.13.6_20260617_rel21769_common_up_2026-06-17_06.03.29.zip)**\n\n### Additional Information\n\nIf somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:\n\n* **Omada Controller version** _(previous and current)_\n* **Device Model(s), Hardware and Firmware versions**\n* (if possible) A copy of the **Log file** and **Backup Config** **file**\n\nIf you decide to downgrade the controller before reporting the issue to TP-Link, it's recommended to save a copy of the current Log file and Backup Config file, which could help TP-Link investigate and address the problem quickly.\n\n\\>> How to get the **Log file** and **Backup Config file** for Omada SDN Controller:\n\n* If your Windows software controller failed to launch, please locate the controller installation path for the Log file.\n \n* If it's not a launch issue, you can export the Log file and Backup Config file to the local network.\n \n * For Omada Controller v5.8 or later version,\n \n In the **_Global View_**, go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. On the same page, scroll down to Export for Support, then click Export Running Logs to download the desensitized Log file.\n \n * For Omada Controller v5.6 or v5.7, \n \n Go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. On the same page, scroll down to Export for Support, then click Export Running Logs to download the desensitized Log file.\n \n * For Omada Controller v5.5 or a previous version,\n \n Go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. Go to **_Settings > Services > Export Data > Running Log_** to export the Log file.\n \n\nUpdate Log\n==========\n\n### June 18th, 2026\n\nRelease of this article.\n\n**Recommended Threads**\n=======================\n\n**[EAP7xx Fully Adapted to Omada 6.2 Pre-release Firmware (Released on 23rd Jan, 2026)](https://community.tp-link.com/en/business/forum/topic/855714)**\n\n**[ER7206 V2 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857562?moduleId=794)**\n\n**[ER707-M2 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857570?moduleId=794)**\n\n**[ER7406 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857568?moduleId=794)**\n\n**[Omada\\_Network\\_Application\\_V6.2.14.x Pre-Release Firmware (Released on 18th June, 2026)](https://community.tp-link.com/en/business/forum/topic/866594?moduleId=582)**\n\nWish you a happy life and smooth network usage!  [Help Us Improve - Omada AP Installation Guide](https://community.tp-link.com/en/business/forum/topic/866618) [\\>Get the Latest Omada SDN Controller Releases Here<](https://community.tp-link.com/en/business/forum/topic/245226) [\\>Get the Latest Firmware Releases for Omada Routers Here<](https://community.tp-link.com/en/business/forum/topic/255644) [\\>Experience the Latest Omada EAP Firmware<](https://community.tp-link.com/en/business/forum/topic/616026)\n\n  0\n\nWe appreciate your feedback. Feel free to let us know more. Log in to submit feedback.\n\n     \n\n \n\n* [Facebook](https://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F866770)\n* [Linkedin](http://www.linkedin.com/shareArticle?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F866770)\n* [Twitter](http://twitter.com/share?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F866770)\n\n  0\n\nWe appreciate your feedback. Feel free to let us know more. Log in to submit feedback.\n\n     \n\n \n\n* [Facebook](https://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F866770)\n* [Linkedin](http://www.linkedin.com/shareArticle?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F866770)\n* [Twitter](http://twitter.com/share?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F866770)","body_html":"
Hardware Omada SDN Controllers V6.2.14.x Pre-Release Firmware (Released on 18th June, 2026)
a week ago - last edited a week ago
Tags:\n

This Article Applies to

\n \n

OC200(UN)_V1_1.41.6_pre-release (Built-in Omada SDN Controller 6.2.14)

\n

OC200(UN)_V2_2.26.6_pre-release (Built-in Omada SDN Controller 6.2.14)

\n

OC200(UN)_V3_3.3.6_pre-release (Built-in Omada SDN Controller 6.2.14)

\n

OC220(UN)_V1_1.6.6_pre-release (Built-in Omada SDN Controller 6.2.14)

\n

OC220(UN)_V2_2.5.6_pre-release (Built-in Omada SDN Controller 6.2.14)

\n

OC300(UN)_V1_1.35.6_pre-release (Built-in Omada SDN Controller 6.2.14)

\n

OC400(UN)_V1_1.13.6_pre-release (Built-in Omada SDN Controller 6.2.14)

\n \n

Overview

\n \n

We hope to offer you the opportunity to experience the new features added in Controller vv6.2.14.x in advance, and to allow TP-Link to thoroughly test the firmware in your real network environment and across scenarios before the official release. All feedback is welcome, including reports of successful upgrades.

\n \n \n

Release Notes

\n \n

Version Info

\n

This version of the Controller is fully compatible with the Omada App version 5.2.x or above.

\n \n

Supported Device Models

\n

For device models Omada Software Controller supports, refer to the Omada Cloud SDN Platform Compatibility List.

\n \n

New Features

\n \n

There are no new feature updates compared to Omada Software Controller v6.2.10.

\n \n

Enhancements

\n \n
    \n
  1. Optimized device authentication and security mechanisms, introduced device-level digital certificates (DAC) and a more secure authentication process (SPAKE2+), and enhanced the security and trustworthiness of device adoption. (Requires firmware support)
    2. \n
  2. Optimized Label functionality, which supports adding labels to name the Gateway port under the Site view > Device List > Gateway > Manage Device > Ports.
    3. \n
\n \n

Notes

\n \n
    \n
  1. Please note that Controllers on different platforms may vary in features, even if their first three digits of the version code are the same. For example, the Linux Controller currently supports Cluster Mode, but the Windows Controller doesn't support it yet.
    2. \n
  2. The Omada SDN Controller can only manage specific devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.
    3. \n
  3. Since version 5.14.32, the Omada Software Controller no longer supports upgrading from Controller v4.
    4. \n
  4. To strengthen overall security, we recommend upgrading all devices to the latest firmware.
    5. \n
\n \n

 

\n

Firmware Download

\n \n

Before the Upgrade

\n

(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!

\n

(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.

\n

(3) You may follow the following guide to upgrade your Omada Controller. How to Upgrade or Downgrade Omada SDN Controller.

\n

 

\n

Firmware Download Link

\n \n

Direct Download

\n


OC200(UN)_V1_1.41.6_pre-release (Built-in Omada SDN Controller 6.2.14)

\n

OC200(UN)_V2_2.26.6_pre-release (Built-in Omada SDN Controller 6.2.14)

\n

OC200(UN)_V3_3.3.6_pre-release (Built-in Omada SDN Controller 6.2.14)

\n

OC220(UN)_V1_1.6.6_pre-release (Built-in Omada SDN Controller 6.2.14)

\n

OC220(UN)_V2_2.5.6_pre-release (Built-in Omada SDN Controller 6.2.14)

\n

OC300(UN)_V1_1.35.6_pre-release (Built-in Omada SDN Controller 6.2.14)

\n

OC400(UN)_V1_1.13.6_pre-release (Built-in Omada SDN Controller 6.2.14)

\n \n

Additional Information

\n \n

If somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:

\n \n \n

If you decide to downgrade the controller before reporting the issue to TP-Link, it's recommended to save a copy of the current Log file and Backup Config file, which could help TP-Link investigate and address the problem quickly.

\n \n

>> How to get the Log file and Backup Config file for Omada SDN Controller:

\n \n \n \n

Update Log

\n \n

June 18th, 2026

\n

Release of this article.

\n \n

Recommended Threads

\n \n

EAP7xx Fully Adapted to Omada 6.2 Pre-release Firmware (Released on 23rd Jan, 2026)

\n

ER7206 V2 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

ER707-M2 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

ER7406 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

Omada_Network_Application_V6.2.14.x Pre-Release Firmware (Released on 18th June, 2026)

\n
\nWish you a happy life and smooth network usage! \nHelp Us Improve - Omada AP Installation Guide\n>Get the Latest Omada SDN Controller Releases Here<\n>Get the Latest Firmware Releases for Omada Routers Here<\n>Experience the Latest Omada EAP Firmware<
  0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
     
 
  0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
     
 
","link":"https://community.tp-link.com/en/business/forum/topic/866770","summary":"Hardware Omada SDN Controllers V6.2.14.x Pre-Release Firmware (Released on 18th June, 2026)","type":"hardware","version":"6.2.14.x","platform":"unknown","date":"2026-06-18T00:00:00.000Z"},{"body":"Omada\\_Network\\_Application\\_V6.2.14.x Pre-Release Firmware (Released on 18th June, 2026)\n\na week ago - last edited a week ago\n\nTags:\n\nThis Article Applies to\n=======================\n\nOmada\\_Network\\_Application\\_v6.2.14.x\\_Windows (Windows 10/11/Server, 64-bit Recommended)\n\nOmada\\_Network\\_Application\\_v6.2.14.x\\_linux\\_x64.tar.gz\n\nOmada\\_Network\\_Application\\_v6.2.14.x\\_linux\\_x64.deb\n\nOverview\n========\n\nWe hope to offer you the opportunity to experience the new features added in Controller vv6.2.14.x in advance, and to allow TP-Link to thoroughly test the firmware in your real network environment and across scenarios before the official release. All feedback is welcome, including reports of successful upgrades.\n\nRelease Notes\n=============\n\nVersion Info\n------------\n\nThis version of the Controller is fully compatible with the Omada App version 5.2.x or above.\n\nSupported Device Models\n-----------------------\n\nFor device models Omada Software Controller supports, refer to the **[Omada Cloud SDN Platform Compatibility List](https://www.tp-link.com/en/omada-sdn/product-list/).**\n\n**New Features**\n----------------\n\nThere are no new feature updates compared to Omada Software Controller v6.2.10.\n\n**Enhancements**\n----------------\n\n1. Optimized device authentication and security mechanisms, introduced device-level digital certificates (DAC) and a more secure authentication process (SPAKE2+), and enhanced the security and trustworthiness of device adoption. (Requires firmware support)\n2. Optimized Label functionality, which supports adding labels to name the Gateway port under the Site view > Device List > Gateway > Manage Device > Ports.\n\n**Notes**\n=========\n\n1. Please note that Controllers on different platforms may vary in features, even if their first three digits of the version code are the same. For example, the Linux Controller currently supports Cluster Mode, but the Windows Controller doesn't support it yet.\n2. The Omada SDN Controller can only manage specific devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.\n3. Since version 5.14.32, the Omada Software Controller no longer supports upgrading from Controller v4.\n4. To strengthen overall security, we recommend upgrading all devices to the latest firmware.\n\nFirmware Download\n=================\n\n### **Before the Upgrade**\n\n(1) Please be sure you have read the [Beta Test Agreement](https://community.tp-link.com/en/business/forum/topic/275514) before upgrading the Pre-release firmware!\n\n(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.\n\n(3) You may follow the following guide to upgrade your Omada Controller. **[How to Upgrade or Downgrade Omada SDN Controller](https://community.tp-link.com/en/business/forum/topic/616596).**\n\n### **Firmware Download Link**\n\n**Direct Download**\n\n**[Omada\\_Network\\_Application\\_v6.2.14.6 Windows (Windows 10/11/Server, 64-bit Recommended)](https://static.tp-link.com/upload/beta/2026/202606/20260617/Omada_Network_Application_Windows_v6.2.14.6.zip)**\n\n**[Omada\\_Network\\_Application\\_v6.2.14.6 \\_linux\\_x64.tar.gz](https://static.tp-link.com/upload/beta/2026/202606/20260617/Omada_Network_Application_v6.2.14.6_linux_x64_20260617091720.tar.gz.zip)**\n\n**[Omada\\_Network\\_Application\\_v6.2.14.6 \\_linux\\_x64.deb](https://static.tp-link.com/upload/beta/2026/202606/20260617/Omada_Network_Application_v6.2.14.6_linux_x64_20260617091728.deb.zip)**\n\n### Additional Information\n\nIf somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:\n\n* **Omada Controller version** _(previous and current)_\n* **Device Model(s), Hardware and Firmware versions**\n* (if possible) A copy of the **Log file** and **Backup Config** **file**\n\nIf you decide to downgrade the controller before reporting the issue to TP-Link, it's recommended to save a copy of the current Log file and Backup Config file, which could help TP-Link investigate and address the problem quickly.\n\n\\>> How to get the **Log file** and **Backup Config file** for Omada SDN Controller:\n\n* If your Windows software controller failed to launch, please locate the controller installation path for the Log file.\n \n* If it's not a launch issue, you can export the Log file and Backup Config file to the local network.\n \n * For Omada Controller v5.8 or later version,\n \n In the **_Global View_**, go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. On the same page, scroll down to Export for Support, then click Export Running Logs to download the desensitized Log file.\n \n * For Omada Controller v5.6 or v5.7, \n \n Go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. On the same page, scroll down to Export for Support, then click Export Running Logs to download the desensitized Log file.\n \n * For Omada Controller v5.5 or a previous version,\n \n Go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. Go to **_Settings > Services > Export Data > Running Log_** to export the Log file.\n \n\nUpdate Log\n==========\n\n### June 18th, 2026\n\nProvide the following firmware:\n\nOmada\\_Network\\_Application\\_v6.2.14.6 Windows (Windows 10/11/Server, 64-bit Recommended)\n\nOmada\\_Network\\_Application\\_v6.2.14.6 \\_linux\\_x64.tar.gz\n\nOmada\\_Network\\_Application\\_v6.2.14.6 \\_linux\\_x64.deb\n\n**Recommended Threads**\n=======================\n\n**[EAP7xx Fully Adapted to Omada 6.2 Pre-release Firmware (Released on 23rd Jan, 2026)](https://community.tp-link.com/en/business/forum/topic/855714)**\n\n**[Hardware Controllers Omada SDN Controller 6.2 Pre-Release Firmware (Released on 4th Mar, 2026)](https://community.tp-link.com/en/business/forum/topic/859086?page=1)**\n\n**[ER7206 V2 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857562?moduleId=794)**\n\n**[ER707-M2 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857570?moduleId=794)**\n\n**[ER7406 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857568?moduleId=794)**\n\nWish you a happy life and smooth network usage!  [Help Us Improve - Omada AP Installation Guide](https://community.tp-link.com/en/business/forum/topic/866618) [\\>Get the Latest Omada SDN Controller Releases Here<](https://community.tp-link.com/en/business/forum/topic/245226) [\\>Get the Latest Firmware Releases for Omada Routers Here<](https://community.tp-link.com/en/business/forum/topic/255644) [\\>Experience the Latest Omada EAP Firmware<](https://community.tp-link.com/en/business/forum/topic/616026)\n\n  0\n\nWe appreciate your feedback. Feel free to let us know more. Log in to submit feedback.\n\n     \n\n \n\n* [Facebook](https://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F866594)\n* [Linkedin](http://www.linkedin.com/shareArticle?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F866594)\n* [Twitter](http://twitter.com/share?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F866594)\n\n  0\n\nWe appreciate your feedback. Feel free to let us know more. Log in to submit feedback.\n\n     \n\n \n\n* [Facebook](https://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F866594)\n* [Linkedin](http://www.linkedin.com/shareArticle?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F866594)\n* [Twitter](http://twitter.com/share?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F866594)","body_html":"
Omada_Network_Application_V6.2.14.x Pre-Release Firmware (Released on 18th June, 2026)
a week ago - last edited a week ago
Tags:\n

This Article Applies to

\n \n

Omada_Network_Application_v6.2.14.x_Windows (Windows 10/11/Server, 64-bit Recommended)

\n

Omada_Network_Application_v6.2.14.x_linux_x64.tar.gz

\n

Omada_Network_Application_v6.2.14.x_linux_x64.deb

\n \n

Overview

\n \n

We hope to offer you the opportunity to experience the new features added in Controller vv6.2.14.x in advance, and to allow TP-Link to thoroughly test the firmware in your real network environment and across scenarios before the official release. All feedback is welcome, including reports of successful upgrades.

\n \n \n

Release Notes

\n \n

Version Info

\n

This version of the Controller is fully compatible with the Omada App version 5.2.x or above.

\n \n

Supported Device Models

\n

For device models Omada Software Controller supports, refer to the Omada Cloud SDN Platform Compatibility List.

\n \n

New Features

\n \n

There are no new feature updates compared to Omada Software Controller v6.2.10.

\n \n

Enhancements

\n \n
    \n
  1. Optimized device authentication and security mechanisms, introduced device-level digital certificates (DAC) and a more secure authentication process (SPAKE2+), and enhanced the security and trustworthiness of device adoption. (Requires firmware support)
    2. \n
  2. Optimized Label functionality, which supports adding labels to name the Gateway port under the Site view > Device List > Gateway > Manage Device > Ports.
    3. \n
\n \n

Notes

\n \n
    \n
  1. Please note that Controllers on different platforms may vary in features, even if their first three digits of the version code are the same. For example, the Linux Controller currently supports Cluster Mode, but the Windows Controller doesn't support it yet.
    2. \n
  2. The Omada SDN Controller can only manage specific devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.
    3. \n
  3. Since version 5.14.32, the Omada Software Controller no longer supports upgrading from Controller v4.
    4. \n
  4. To strengthen overall security, we recommend upgrading all devices to the latest firmware.
    5. \n
\n \n

 

\n

Firmware Download

\n \n

Before the Upgrade

\n

(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!

\n

(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.

\n

(3) You may follow the following guide to upgrade your Omada Controller. How to Upgrade or Downgrade Omada SDN Controller.

\n

 

\n

Firmware Download Link

\n \n

Direct Download

\n \n

Omada_Network_Application_v6.2.14.6 Windows (Windows 10/11/Server, 64-bit Recommended)

\n

Omada_Network_Application_v6.2.14.6 _linux_x64.tar.gz

\n

Omada_Network_Application_v6.2.14.6 _linux_x64.deb

\n \n \n

Additional Information

\n \n

If somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:

\n \n \n

If you decide to downgrade the controller before reporting the issue to TP-Link, it's recommended to save a copy of the current Log file and Backup Config file, which could help TP-Link investigate and address the problem quickly.

\n \n

>> How to get the Log file and Backup Config file for Omada SDN Controller:

\n \n \n \n

Update Log

\n \n

June 18th, 2026

\n

Provide the following firmware:

\n

Omada_Network_Application_v6.2.14.6 Windows (Windows 10/11/Server, 64-bit Recommended)

\n

Omada_Network_Application_v6.2.14.6 _linux_x64.tar.gz

\n

Omada_Network_Application_v6.2.14.6 _linux_x64.deb

\n \n

Recommended Threads

\n \n

EAP7xx Fully Adapted to Omada 6.2 Pre-release Firmware (Released on 23rd Jan, 2026)

\n

Hardware Controllers Omada SDN Controller 6.2 Pre-Release Firmware (Released on 4th Mar, 2026)

\n

ER7206 V2 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

ER707-M2 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

ER7406 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n \n
\nWish you a happy life and smooth network usage! \nHelp Us Improve - Omada AP Installation Guide\n>Get the Latest Omada SDN Controller Releases Here<\n>Get the Latest Firmware Releases for Omada Routers Here<\n>Experience the Latest Omada EAP Firmware<
  0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
     
 
  0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
     
 
","link":"https://community.tp-link.com/en/business/forum/topic/866594","summary":"Omada_Network_Application_V6.2.14.x Pre-Release Firmware (Released on 18th June, 2026)","type":"software","version":"6.2.14.x","platform":"unknown","date":"2026-06-18T00:00:00.000Z"},{"body":"Hardware Controllers Omada SDN Controller 6.2.10 Pre-Release Firmware (Closed)\n\n2026-04-09 09:19:59 - last edited 2026-05-19 01:50:14\n\nTags:\n\nThis Article Applies to\n=======================\n\nOC200(UN)\\_V1\\_1.40.x\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC200(UN)\\_V2\\_2.25.x\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC200(UN)\\_V3\\_3.2.x\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC220(UN)\\_V1\\_1.5.x\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC220(UN)\\_V2\\_2.4.x\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC300(UN)\\_V1\\_1.34.x\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC400(UN)\\_V1\\_1.12.x\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOverview\n========\n\nWe hope to offer you the opportunity to experience the new features added in Controller v6.2.10.x in advance, and to allow TP-Link to thoroughly test the firmware in your real network environment and across scenarios before the official release. All feedback is welcome, including reports of successful upgrades.\n\nRelease Notes\n=============\n\nVersion Info\n------------\n\nThis version of the Controller is fully compatible with the Omada App version 5.2.x.\n\nSupported Device Models\n-----------------------\n\nFor device models Omada Software Controller supports, refer to the **[Omada Cloud SDN Platform Compatibility List](https://www.tp-link.com/en/omada-sdn/product-list/).**\n\nAdded support for Access Points: Flex Bridge 5.\n\n**New Features**\n----------------\n\n1. Added support for Wi-Fi Calling, available at **Site > Device Config > AP > Wi-Fi Calling**, **Site > Network Config > Network Setting > WLAN > Advanced Settings > Wi-Fi Calling**. The transmission of voice and text messages over Wi-Fi networks is more stable, and a new accompanying Wi-Fi Calling statistics chart has been added. (Requires EAP firmware support) \n2. Added support for load balancing across access points, available at **Site > Network Config > WLAN > SSID > Advanced Settings > Load Balance**, balancing client distribution across access points and frequency bands to improve network performance. (Requires EAP firmware support) \n3. Added support for SSID Band Steering, available at **Site > Network Config > WLAN > SSID > Advanced Settings > Band Steering**, the SSID configuration takes precedence over the Site configuration. (Requires EAP firmware support) \n4. Added support for WLAN Optimization Schedule, available at **Site > Network Config > Network Setting > WLAN > WLAN Optimization > Manual WLAN Optimization > Schedule.** Configuration can be done by Day, Week, and Month. \n5. Added support for displaying the AFC acquisition status, available at **Device > Device List > AFC**. (Requires EAP firmware support) \n6. Added support for CCI and AP Density charts, **available at Site > Dashboard > Wi-Fi > WLAN Optimization**. Co-channel interference (CCI) indicates the degree of interference experienced by APs on the same channel, AP density reflecting the deployment status of APs. \n7. Updated SD-WAN access control logic, Users must have All Sites permissions to view the SD-WAN page. SD-WAN page can be modified by Modify, Viewer only allows viewing, and Block hides. \n8. Added support for PVST/PVST+/PRST/RPVST+, available at **Devices > Device List > Manage Device > Config > Services**. The addition of RPVST improves link utilization and fault recovery speed in multi-VLAN scenarios. CIST Priority and MaxHops are not supported in this mode. (Requires Switch firmware support) \n9. Added support for configuring stack port speed on L3 switches, devices with different stacking port speeds can now form a stack group. Available at **Devices > Device Group > Stack Group**. (Requires Switch firmware support) \n10. Update the configuration of SNMPv3, available at **Network Config > General Settings > SNMP**. Added Security Level, Authentication Mode, Authentication Password, Privacy Mode and Privacy Password configurations. (Requires firmware support, Gateway support will be available in a future firmware release)\n11. Added support for Cloud Owner Permission Migration, available at **Account > User**. Local Owner and Cloud Owner users are allowed to migrate Cloud Owner to an invited Cloud user. After a successful migration, the Cloud Access user becomes the new Cloud Owner, and the original Cloud Owner is downgraded to Admin. \n12. Added support for Backup & Restore through Cloud Access, available at **Settings > Maintenance**. \n13. Added support for Manual Upgrade via Cloud Access, available at **Settings > System Settings > Manual Upgrade**. \n14. Added Description field to Portal Access Control, available at **Site > Network Config > Authentication > Portal > Access Config**. \n15. Added support for PPSK configuration on the 6Ghz band, available at **Site > Network Config > Network Settings > WLAN > SSID**. (Requires EAP firmware support) \n16. Added support for viewing L3 switch dynamic resources, available at **Devices > Device List > Manage Device > Config > General Config**. Supports viewing the current device SDM template, current resource usage, total resource utilization, and remaining available resources. \n17. Added support for static routes in SD-WAN, allowing hubs to configure multiple non-local network routes to enable spoke devices to access hub resources for complex routing scenarios such as third-party devices or remote VPNs, available at **Global > SD-WAN**. (Requires Gateway firmware support) \n\n**Enhancements**\n----------------\n\n1. Optimized EAP topology identification for wired clients. \n2. Automatically modify the Legal DHCP server address and automatically fill in the server IP, available at **Network Config > LAN**. \n3. Optimized the entry points for Restore and Migration functions, available at **Global View > Settings > Migration > Organization Migration**. The Restore function can only restore backup files for the current Controller. Backup files for other Controllers can only be imported via migration. \n4. Optimized EAP batch configuration experience, available at **Site > Devices > Batch Action > Batch Config**. The display logic has been adjusted and the configuration result will now be displayed after configuration is complete. \n5. Optimized the display and sorting of Client and Device list. \n6. Optimized multiple interactions, now supports drag-and-drop selection of ports, available at **Dashboard > Topology > Quick Config > Extend Mode, Port Reboot, Port Isolation** and **Network Wizard**; **Network Config > Switch ACL, Port Schedule** and **OUI Based VLAN**. \n7. Optimized the Quick Setup process and simplify configuration steps. \n8. Optimized VLAN configuration by adding VLAN configuration to the Switch Port Profile, which in turn optimizes the Port page and VLAN page, improving configuration flexibility, available at **Device Config > Switch Ports > Port Profile**; **Device > Manage Device > Ports**; **Network Config > LAN**; **Device Config > Switch Ports > Port Setting**. \n9. Optimized Site Migration, an exit button has been added, the Skip button for the Export Site step has been changed to Next, and the Skip button for Migrate Site has been removed, available at **Global View > Settings > Migration > Site Migration**. \n10. Optimized Lock to EAP function, when the Lock AP configured by the Client is offline, the Client can connect to others under the Site. \n11. Other feature optimizations include improved Cloud Access connection speed, faster page load times, and enhanced Portal authentication page performance. \n\n**Notes**\n=========\n\n1. Please note that Controllers on different platforms may vary in features, even if their first three digits of the version code are the same. For example, the Linux Controller currently supports Cluster Mode, but the Windows Controller doesn't support it yet.\n2. The Omada SDN Controller can only manage specific devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.\n3. Since version 5.14.32, the Omada Software Controller no longer supports upgrading from Controller v4.\n4. To strengthen overall security, we recommend upgrading all devices to the latest firmware.\n\nFirmware Download\n=================\n\n### **Before the Upgrade**\n\n(1) Please be sure you have read the [Beta Test Agreement](https://community.tp-link.com/en/business/forum/topic/275514) before upgrading the Pre-release firmware!\n\n(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.\n\n(3) You may follow the following guide to upgrade your Omada Controller. **[How to Upgrade or Downgrade Omada SDN Controller](https://community.tp-link.com/en/business/forum/topic/616596).**\n\n### **Firmware Download Link**\n\n**Direct Download**\n\nOC200(UN)\\_V1\\_1.40.17\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC200(UN)\\_V2\\_2.25.17\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC200(UN)\\_V3\\_3.2.17\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC220(UN)\\_V1\\_1.5.17\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC220(UN)\\_V2\\_2.4.17\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC300(UN)\\_V1\\_1.34.17\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC400(UN)\\_V1\\_1.12.17\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC200(UN)\\_V1\\_1.40.15\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC200(UN)\\_V2\\_2.25.15\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC200(UN)\\_V3\\_3.2.15\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC220(UN)\\_V1\\_1.5.15\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC220(UN)\\_V2\\_2.4.15\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC300(UN)\\_V1\\_1.34.15\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC400(UN)\\_V1\\_1.12.15\\_pre-release (Built-in Omada SDN Controller 6.2.10) \n \n\nOC200(UN)\\_V1\\_1.40.11\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC200(UN)\\_V2\\_2.25.11\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC200(UN)\\_V3\\_3.2.11\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC220(UN)\\_V1\\_1.5.11\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC220(UN)\\_V2\\_2.4.11\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC300(UN)\\_V1\\_1.34.11\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC400(UN)\\_V1\\_1.12.11\\_pre-release (Built-in Omada SDN Controller 6.2.10) \n \n\n### Additional Information\n\nIf somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:\n\n* **Omada Controller version** _(previous and current)_\n* **Device Model(s), Hardware and Firmware versions**\n* (if possible) A copy of the **Log file** and **Backup Config** **file**\n\nIf you decide to downgrade the controller before reporting the issue to TP-Link, it's recommended to save a copy of the current Log file and Backup Config file, which could help TP-Link investigate and address the problem quickly.\n\n\\>> How to get the **Log file** and **Backup Config file** for Omada SDN Controller:\n\n* If your Windows software controller failed to launch, please locate the controller installation path for the Log file.\n \n* If it's not a launch issue, you can export the Log file and Backup Config file to the local network.\n \n * For Omada Controller v5.8 or later version,\n \n In the **_Global View_**, go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. On the same page, scroll down to Export for Support, then click Export Running Logs to download the desensitized Log file.\n \n * For Omada Controller v5.6 or v5.7, \n \n Go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. On the same page, scroll down to Export for Support, then click Export Running Logs to download the desensitized Log file.\n \n * For Omada Controller v5.5 or a previous version,\n \n Go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. Go to **_Settings > Services > Export Data > Running Log_** to export the Log file.\n \n\nUpdate Log\n==========\n\n### May 19th, 2026\n\nRemove all the download links. For the latest version, please visit [TP-Link official website](https://support.omadanetworks.com).\n\n### Apr 30th, 2026\n\nProvide the following firmware:\n\nOC200(UN)\\_V1\\_1.40.17\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC200(UN)\\_V2\\_2.25.17\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC200(UN)\\_V3\\_3.2.17\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC220(UN)\\_V1\\_1.5.17\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC220(UN)\\_V2\\_2.4.17\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC300(UN)\\_V1\\_1.34.17\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC400(UN)\\_V1\\_1.12.17\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\n**Update Note:**\n\n1\\. Fixed issues with ECC certificates.\n\n2\\. Fixed some other known issues.\n\n### Apr 21st, 2026\n\nProvide the following firmware:\n\nOC200(UN)\\_V1\\_1.40.15\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC200(UN)\\_V2\\_2.25.15\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC200(UN)\\_V3\\_3.2.15\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC220(UN)\\_V1\\_1.5.15\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC220(UN)\\_V2\\_2.4.15\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC300(UN)\\_V1\\_1.34.15\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC400(UN)\\_V1\\_1.12.15\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\n**Update Note:**\n\nFixed some known issues.\n\n### Apr 10th, 2026\n\nRemove point 12&13 from the New Features section.\n\n### Apr 9th, 2026\n\nProvide the following firmware:\n\nOC200(UN)\\_V1\\_1.40.11\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC200(UN)\\_V2\\_2.25.11\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC200(UN)\\_V3\\_3.2.11\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC220(UN)\\_V1\\_1.5.11\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC220(UN)\\_V2\\_2.4.11\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC300(UN)\\_V1\\_1.34.11\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\nOC400(UN)\\_V1\\_1.12.11\\_pre-release (Built-in Omada SDN Controller 6.2.10)\n\n**Recommended Threads**\n=======================\n\n**[EAP7xx Fully Adapted to Omada 6.2 Pre-release Firmware (Released on 23rd Jan, 2026)](https://community.tp-link.com/en/business/forum/topic/855714)**\n\n**[ER7206 V2 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857562?moduleId=794)**\n\n**[ER707-M2 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857570?moduleId=794)**\n\n**[ER7406 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857568?moduleId=794)**\n\n**[Omada\\_Network\\_Application\\_V6.2.10.x Pre-Release Firmware (Updated on 3rd Apr, 2026)](https://community.tp-link.com/en/business/forum/topic/860960)** \n[**Omada Switch Pre-Release FW Preview for SDN Controller 6.2.X.X (Update on Apr, 1st, 2026)**](https://community.tp-link.com/en/business/forum/topic/859400)\n\nWish you a happy life and smooth network usage!  [\\>Omada US Enterprise Beta Program Launch<](https://community.tp-link.com/en/business/forum/topic/846442) [\\>Get the Latest Omada SDN Controller Releases Here<](https://community.tp-link.com/en/business/forum/topic/245226) [\\>Experience the Latest Omada EAP Firmware<](https://community.tp-link.com/en/business/forum/topic/616026)\n\nWish you a happy life and smooth network usage!  [Help Us Improve - Omada AP Installation Guide](https://community.tp-link.com/en/business/forum/topic/866618) [\\>Get the Latest Omada SDN Controller Releases Here<](https://community.tp-link.com/en/business/forum/topic/245226) [\\>Get the Latest Firmware Releases for Omada Routers Here<](https://community.tp-link.com/en/business/forum/topic/255644) [\\>Experience the Latest Omada EAP Firmware<](https://community.tp-link.com/en/business/forum/topic/616026)\n\n  0\n\nWe appreciate your feedback. Feel free to let us know more. Log in to submit feedback.\n\n     \n\n \n\n* [Facebook](https://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F861796)\n* [Linkedin](http://www.linkedin.com/shareArticle?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F861796)\n* [Twitter](http://twitter.com/share?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F861796)\n\n  0\n\nWe appreciate your feedback. Feel free to let us know more. Log in to submit feedback.\n\n     \n\n \n\n* [Facebook](https://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F861796)\n* [Linkedin](http://www.linkedin.com/shareArticle?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F861796)\n* [Twitter](http://twitter.com/share?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F861796)","body_html":"
Hardware Controllers Omada SDN Controller 6.2.10 Pre-Release Firmware (Closed)
2026-04-09 09:19:59 - last edited 2026-05-19 01:50:14
Tags:\n

This Article Applies to

\n \n

OC200(UN)_V1_1.40.x_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC200(UN)_V2_2.25.x_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC200(UN)_V3_3.2.x_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC220(UN)_V1_1.5.x_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC220(UN)_V2_2.4.x_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC300(UN)_V1_1.34.x_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC400(UN)_V1_1.12.x_pre-release (Built-in Omada SDN Controller 6.2.10)

\n \n

Overview

\n \n

We hope to offer you the opportunity to experience the new features added in Controller v6.2.10.x in advance, and to allow TP-Link to thoroughly test the firmware in your real network environment and across scenarios before the official release. All feedback is welcome, including reports of successful upgrades.

\n \n

Release Notes

\n \n

Version Info

\n

This version of the Controller is fully compatible with the Omada App version 5.2.x.

\n \n

Supported Device Models

\n

For device models Omada Software Controller supports, refer to the Omada Cloud SDN Platform Compatibility List.

\n \n

Added support for Access Points: Flex Bridge 5.

\n \n

New Features

\n \n
    \n
  1. Added support for Wi-Fi Calling, available at Site > Device Config > AP > Wi-Fi Calling, Site > Network Config > Network Setting > WLAN > Advanced Settings > Wi-Fi Calling. The transmission of voice and text messages over Wi-Fi networks is more stable, and a new accompanying Wi-Fi Calling statistics chart has been added. (Requires EAP firmware support) 
    2. \n
  2. Added support for load balancing across access points, available at Site > Network Config > WLAN > SSID > Advanced Settings > Load Balance, balancing client distribution across access points and frequency bands to improve network performance. (Requires EAP firmware support) 
    3. \n
  3. Added support for SSID Band Steering, available at Site > Network Config > WLAN > SSID > Advanced Settings > Band Steering, the SSID configuration takes precedence over the Site configuration. (Requires EAP firmware support) 
    4. \n
  4. Added support for WLAN Optimization Schedule, available at Site > Network Config > Network Setting > WLAN > WLAN Optimization > Manual WLAN Optimization > Schedule. Configuration can be done by Day, Week, and Month. 
    5. \n
  5. Added support for displaying the AFC acquisition status, available at Device > Device List > AFC. (Requires EAP firmware support) 
    6. \n
  6. Added support for CCI and AP Density charts, available at Site > Dashboard > Wi-Fi > WLAN Optimization. Co-channel interference (CCI) indicates the degree of interference experienced by APs on the same channel, AP density reflecting the deployment status of APs. 
    7. \n
  7. Updated SD-WAN access control logic, Users must have All Sites permissions to view the SD-WAN page. SD-WAN page can be modified by Modify, Viewer only allows viewing, and Block hides. 
    8. \n
  8. Added support for PVST/PVST+/PRST/RPVST+, available at Devices > Device List > Manage Device > Config > Services. The addition of RPVST improves link utilization and fault recovery speed in multi-VLAN scenarios. CIST Priority and MaxHops are not supported in this mode. (Requires Switch firmware support) 
    9. \n
  9. Added support for configuring stack port speed on L3 switches, devices with different stacking port speeds can now form a stack group. Available at Devices > Device Group > Stack Group. (Requires Switch firmware support) 
    10. \n
  10. Update the configuration of SNMPv3, available at Network Config > General Settings > SNMP. Added Security Level, Authentication Mode, Authentication Password, Privacy Mode and Privacy Password configurations. (Requires firmware support, Gateway support will be available in a future firmware release)
    11. \n
  11. Added support for Cloud Owner Permission Migration, available at Account > User. Local Owner and Cloud Owner users are allowed to migrate Cloud Owner to an invited Cloud user. After a successful migration, the Cloud Access user becomes the new Cloud Owner, and the original Cloud Owner is downgraded to Admin. 
    12. \n
  12. Added support for Backup & Restore through Cloud Access, available at Settings > Maintenance. 
    13. \n
  13. Added support for Manual Upgrade via Cloud Access, available at Settings > System Settings > Manual Upgrade. 
    14. \n
  14. Added Description field to Portal Access Control, available at Site > Network Config > Authentication > Portal > Access Config. 
    15. \n
  15. Added support for PPSK configuration on the 6Ghz band, available at Site > Network Config > Network Settings > WLAN > SSID. (Requires EAP firmware support) 
    16. \n
  16. Added support for viewing L3 switch dynamic resources, available at Devices > Device List > Manage Device > Config > General Config. Supports viewing the current device SDM template, current resource usage, total resource utilization, and remaining available resources. 
    17. \n
  17. Added support for static routes in SD-WAN, allowing hubs to configure multiple non-local network routes to enable spoke devices to access hub resources for complex routing scenarios such as third-party devices or remote VPNs, available at Global > SD-WAN. (Requires Gateway firmware support) 
    18. \n
\n \n

Enhancements

\n \n
    \n
  1. Optimized EAP topology identification for wired clients. 
    2. \n
  2. Automatically modify the Legal DHCP server address and automatically fill in the server IP, available at Network Config > LAN. 
    3. \n
  3. Optimized the entry points for Restore and Migration functions, available at Global View > Settings > Migration > Organization Migration. The Restore function can only restore backup files for the current Controller. Backup files for other Controllers can only be imported via migration. 
    4. \n
  4. Optimized EAP batch configuration experience, available at Site > Devices > Batch Action > Batch Config. The display logic has been adjusted and the configuration result will now be displayed after configuration is complete. 
    5. \n
  5. Optimized the display and sorting of Client and Device list. 
    6. \n
  6. Optimized multiple interactions, now supports drag-and-drop selection of ports, available at Dashboard > Topology > Quick Config > Extend Mode, Port Reboot, Port Isolation and Network Wizard; Network Config > Switch ACL, Port Schedule and OUI Based VLAN. 
    7. \n
  7. Optimized the Quick Setup process and simplify configuration steps. 
    8. \n
  8. Optimized VLAN configuration by adding VLAN configuration to the Switch Port Profile, which in turn optimizes the Port page and VLAN page, improving configuration flexibility, available at Device Config > Switch Ports > Port Profile; Device > Manage Device > Ports; Network Config > LAN; Device Config > Switch Ports > Port Setting. 
    9. \n
  9. Optimized Site Migration, an exit button has been added, the Skip button for the Export Site step has been changed to Next, and the Skip button for Migrate Site has been removed, available at Global View > Settings > Migration > Site Migration. 
    10. \n
  10. Optimized Lock to EAP function, when the Lock AP configured by the Client is offline, the Client can connect to others under the Site. 
    11. \n
  11. Other feature optimizations include improved Cloud Access connection speed, faster page load times, and enhanced Portal authentication page performance. 
    12. \n
\n \n

Notes

\n \n
    \n
  1. Please note that Controllers on different platforms may vary in features, even if their first three digits of the version code are the same. For example, the Linux Controller currently supports Cluster Mode, but the Windows Controller doesn't support it yet.
    2. \n
  2. The Omada SDN Controller can only manage specific devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.
    3. \n
  3. Since version 5.14.32, the Omada Software Controller no longer supports upgrading from Controller v4.
    4. \n
  4. To strengthen overall security, we recommend upgrading all devices to the latest firmware.
    5. \n
\n \n

 

\n

Firmware Download

\n \n

Before the Upgrade

\n

(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!

\n

(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.

\n

(3) You may follow the following guide to upgrade your Omada Controller. How to Upgrade or Downgrade Omada SDN Controller.

\n

 

\n

Firmware Download Link

\n \n

Direct Download

\n \n \n

OC200(UN)_V1_1.40.17_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC200(UN)_V2_2.25.17_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC200(UN)_V3_3.2.17_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC220(UN)_V1_1.5.17_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC220(UN)_V2_2.4.17_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC300(UN)_V1_1.34.17_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC400(UN)_V1_1.12.17_pre-release (Built-in Omada SDN Controller 6.2.10)

\n \n

OC200(UN)_V1_1.40.15_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC200(UN)_V2_2.25.15_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC200(UN)_V3_3.2.15_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC220(UN)_V1_1.5.15_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC220(UN)_V2_2.4.15_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC300(UN)_V1_1.34.15_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC400(UN)_V1_1.12.15_pre-release (Built-in Omada SDN Controller 6.2.10)
 

\n \n

OC200(UN)_V1_1.40.11_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC200(UN)_V2_2.25.11_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC200(UN)_V3_3.2.11_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC220(UN)_V1_1.5.11_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC220(UN)_V2_2.4.11_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC300(UN)_V1_1.34.11_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC400(UN)_V1_1.12.11_pre-release (Built-in Omada SDN Controller 6.2.10)
 

\n \n \n

Additional Information

\n \n

If somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:

\n \n \n

If you decide to downgrade the controller before reporting the issue to TP-Link, it's recommended to save a copy of the current Log file and Backup Config file, which could help TP-Link investigate and address the problem quickly.

\n \n

>> How to get the Log file and Backup Config file for Omada SDN Controller:

\n \n \n \n

Update Log

\n

 

\n

May 19th, 2026

\n

Remove all the download links. For the latest version, please visit TP-Link official website.

\n \n

Apr 30th, 2026

\n

Provide the following firmware:

\n

OC200(UN)_V1_1.40.17_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC200(UN)_V2_2.25.17_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC200(UN)_V3_3.2.17_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC220(UN)_V1_1.5.17_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC220(UN)_V2_2.4.17_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC300(UN)_V1_1.34.17_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC400(UN)_V1_1.12.17_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

Update Note:

\n

1. Fixed issues with ECC certificates.

\n

2. Fixed some other known issues.

\n \n \n

Apr 21st, 2026

\n

Provide the following firmware:

\n

OC200(UN)_V1_1.40.15_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC200(UN)_V2_2.25.15_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC200(UN)_V3_3.2.15_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC220(UN)_V1_1.5.15_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC220(UN)_V2_2.4.15_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC300(UN)_V1_1.34.15_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC400(UN)_V1_1.12.15_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

Update Note:

\n

Fixed some known issues.

\n

 

\n \n

Apr 10th, 2026

\n

Remove point 12&13 from the New Features section.

\n

 

\n

Apr 9th, 2026

\n

Provide the following firmware:

\n

OC200(UN)_V1_1.40.11_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC200(UN)_V2_2.25.11_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC200(UN)_V3_3.2.11_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC220(UN)_V1_1.5.11_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC220(UN)_V2_2.4.11_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC300(UN)_V1_1.34.11_pre-release (Built-in Omada SDN Controller 6.2.10)

\n

OC400(UN)_V1_1.12.11_pre-release (Built-in Omada SDN Controller 6.2.10)

\n \n

 

\n

Recommended Threads

\n \n

EAP7xx Fully Adapted to Omada 6.2 Pre-release Firmware (Released on 23rd Jan, 2026)

\n

ER7206 V2 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

ER707-M2 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

ER7406 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

Omada_Network_Application_V6.2.10.x Pre-Release Firmware (Updated on 3rd Apr, 2026)
Omada Switch Pre-Release FW Preview for SDN Controller 6.2.X.X (Update on Apr, 1st, 2026)

\n \n \n

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<

\nWish you a happy life and smooth network usage! \nHelp Us Improve - Omada AP Installation Guide\n>Get the Latest Omada SDN Controller Releases Here<\n>Get the Latest Firmware Releases for Omada Routers Here<\n>Experience the Latest Omada EAP Firmware<
  0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
     
 
  0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
     
 
","link":"https://community.tp-link.com/en/business/forum/topic/861796","summary":"Hardware Controllers Omada SDN Controller 6.2.10 Pre-Release Firmware (Update on 30th Apr, 2026)","type":"hardware","version":"6.2.10","platform":"unknown","date":"2026-04-30T00:00:00.000Z"},{"body":"Omada\\_Network\\_Application\\_V6.2.10.x Pre-Release Firmware (Closed on 30th Apr, 2026)\n\n2026-03-30 09:48:00 - last edited 2026-04-30 01:27:44\n\nTags:\n\nThis Article Applies to\n=======================\n\nOmada\\_Network\\_Application\\_v6.2.10.x\\_Windows (Windows 10/11/Server, 64-bit Recommended)\n\nOmada\\_Network\\_Application\\_v6.2.10.x\\_linux\\_x64.tar.gz\n\nOmada\\_Network\\_Application\\_v6.2.10.x\\_linux\\_x64.deb\n\nOverview\n========\n\nWe hope to offer you the opportunity to experience the new features added in Controller vv6.2.10.x in advance, and to allow TP-Link to thoroughly test the firmware in your real network environment and across scenarios before the official release. All feedback is welcome, including reports of successful upgrades.\n\nRelease Notes\n=============\n\nVersion Info\n------------\n\nThis version of the Controller is fully compatible with the Omada App version 5.2.x or above.\n\nSupported Device Models\n-----------------------\n\nFor device models Omada Software Controller supports, refer to the **[Omada Cloud SDN Platform Compatibility List](https://www.tp-link.com/en/omada-sdn/product-list/).**\n\n**New Features**\n----------------\n\n1. Added support for Wi-Fi Calling, available at **Site > Device Config > AP > Wi-Fi Calling**, **Site > Network Config > Network Setting > WLAN > Advanced Settings > Wi-Fi Calling**. The transmission of voice and text messages over Wi-Fi networks is more stable, and a new accompanying Wi-Fi Calling statistics chart has been added. (Requires EAP firmware support)\n2. Added support for load balancing across access points, available at **Site > Network Config > WLAN > SSID > Advanced Settings > Load Balance**, balancing client distribution across access points and frequency bands to improve network performance. (Requires EAP firmware support) \n3. Added support for SSID Band Steering, available at **Site > Network Config > WLAN > SSID > Advanced Settings > Band Steering**, the SSID configuration takes precedence over the Site configuration. (Requires EAP firmware support)\n4. Added support for WLAN Optimization Schedule, available at **Site > Network Config > Network Setting > WLAN > WLAN Optimization > Manual WLAN Optimization > Schedule.** Configuration can be done by Day, Week, and Month.\n5. Added support for displaying the AFC acquisition status, available at **Device > Device List > AFC**. (Requires EAP firmware support)\n6. Added support for CCI and AP Density charts, **available at Site > Dashboard > Wi-Fi > WLAN Optimization**. Co-channel interference (CCI) indicates the degree of interference experienced by APs on the same channel, AP density reflecting the deployment status of APs.\n7. Updated SD-WAN access control logic, Users must have All Sites permissions to view the SD-WAN page. SD-WAN page can be modified by Modify, Viewer only allows viewing, and Block hides.\n8. Added support for PVST/PVST+/PRST/RPVST+, available at **Devices > Device List > Manage Device > Config > Services**. The addition of RPVST improves link utilization and fault recovery speed in multi-VLAN scenarios. CIST Priority and MaxHops are not supported in this mode. (Requires Switch firmware support)\n9. Added support for configuring stack port speed on L3 switches, devices with different stacking port speeds can now form a stack group. Available at **Devices > Device Group > Stack Group**. (Requires Switch firmware support)\n10. Update the configuration of SNMPv3, available at **Network Config > General Settings > SNMP**. Added Security Level, Authentication Mode, Authentication Password, Privacy Mode and Privacy Password configurations. (Requires firmware support, Gateway support will be available in a future firmware release)\n11. Added support for Cloud Owner Permission Migration, available at **Account > User**. Local Owner and Cloud Owner users are allowed to migrate Cloud Owner to an invited Cloud user. After a successful migration, the Cloud Access user becomes the new Cloud Owner, and the original Cloud Owner is downgraded to Admin\n12. Added support for Backup & Restore through Cloud Access, available at **Settings > Maintenance**.\n13. Added support for Manual Upgrade via Cloud Access, available at **Settings > System Settings > Manual Upgrade**.\n14. Added Description field to Portal Access Control, available at **Site > Network Config > Authentication > Portal > Access Config**.\n15. Added support for PPSK configuration on the 6Ghz band, available at **Site > Network Config > Network Settings > WLAN > SSID**. (Requires EAP firmware support)\n16. Added support for viewing L3 switch dynamic resources, available at **Devices > Device List > Manage Device > Config > General Config**. Supports viewing the current device SDM template, current resource usage, total resource utilization, and remaining available resources.\n17. Added support for static routes in SD-WAN, allowing hubs to configure multiple non-local network routes to enable spoke devices to access hub resources for complex routing scenarios such as third-party devices or remote VPNs, available at **Global > SD-WAN**. (Requires Gateway firmware support)\n\n**Enhancements**\n----------------\n\n1. Optimized EAP topology identification for wired clients.\n2. Automatically modify the Legal DHCP server address and automatically fill in the server IP, available at **Network Config > LAN**.\n3. Optimized the entry points for Restore and Migration functions, available at **Global View > Settings > Migration > Organization Migration**. The Restore function can only restore backup files for the current Controller. Backup files for other Controllers can only be imported via migration.\n4. Optimized EAP batch configuration experience, available at **Site > Devices > Batch Action > Batch Config**. The display logic has been adjusted and the configuration result will now be displayed after configuration is complete.\n5. Optimized the display and sorting of Client and Device list.\n6. Optimized multiple interactions, now supports drag-and-drop selection of ports, available at **Dashboard > Topology > Quick Config > Extend Mode, Port Reboot, Port Isolation** and **Network Wizard**; **Network Config > Switch ACL, Port Schedule** and **OUI Based VLAN**.\n7. Optimized the Quick Setup process and simplify configuration steps.\n8. Optimized VLAN configuration by adding VLAN configuration to the Switch Port Profile, which in turn optimizes the Port page and VLAN page, improving configuration flexibility, available at **Device Config > Switch Ports > Port Profile**; **Device > Manage Device > Ports**; **Network Config > LAN**; **Device Config > Switch Ports > Port Setting**.\n9. Optimized Site Migration, an exit button has been added, the Skip button for the Export Site step has been changed to Next, and the Skip button for Migrate Site has been removed, available at **Global View > Settings > Migration > Site Migration**.\n10. Optimized Lock to EAP function, when the Lock AP configured by the Client is offline, the Client can connect to others under the Site.\n11. Other feature optimizations include improved Cloud Access connection speed, faster page load times, and enhanced Portal authentication page performance.\n\n**Notes**\n=========\n\n1. Please note that Controllers on different platforms may vary in features, even if their first three digits of the version code are the same. For example, the Linux Controller currently supports Cluster Mode, but the Windows Controller doesn't support it yet.\n2. The Omada SDN Controller can only manage specific devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.\n3. Since version 5.14.32, the Omada Software Controller no longer supports upgrading from Controller v4.\n4. To strengthen overall security, we recommend upgrading all devices to the latest firmware.\n\nFirmware Download\n=================\n\n### **Before the Upgrade**\n\n(1) Please be sure you have read the [Beta Test Agreement](https://community.tp-link.com/en/business/forum/topic/275514) before upgrading the Pre-release firmware!\n\n(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.\n\n(3) You may follow the following guide to upgrade your Omada Controller. **[How to Upgrade or Downgrade Omada SDN Controller](https://community.tp-link.com/en/business/forum/topic/616596).**\n\n### **Firmware Download Link**\n\n**Direct Download**\n\nOmada\\_Network\\_Application\\_v6.2.10.15 Windows (Windows 10/11/Server, 64-bit Recommended)\n\nOmada\\_Network\\_Application\\_v6.2.10.15 \\_linux\\_x64.tar.gz\n\nOmada\\_Network\\_Application\\_v6.2.10.15 \\_linux\\_x64.deb \n \n\nOmada\\_Network\\_Application\\_v6.2.10.11 Windows (Windows 10/11/Server, 64-bit Recommended)\n\nOmada\\_Network\\_Application\\_v6.2.10.11 \\_linux\\_x64.tar.gz\n\nOmada\\_Network\\_Application\\_v6.2.10.11 \\_linux\\_x64.deb\n\nOmada\\_Network\\_Application\\_v6.2.10.9 Windows (Windows 10/11/Server, 64-bit Recommended)\n\nOmada\\_Network\\_Application\\_v6.2.10.9 \\_linux\\_x64.tar.gz\n\nOmada\\_Network\\_Application\\_v6.2.10.9 \\_linux\\_x64.deb\n\n### Additional Information\n\nIf somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:\n\n* **Omada Controller version** _(previous and current)_\n* **Device Model(s), Hardware and Firmware versions**\n* (if possible) A copy of the **Log file** and **Backup Config** **file**\n\nIf you decide to downgrade the controller before reporting the issue to TP-Link, it's recommended to save a copy of the current Log file and Backup Config file, which could help TP-Link investigate and address the problem quickly.\n\n\\>> How to get the **Log file** and **Backup Config file** for Omada SDN Controller:\n\n* If your Windows software controller failed to launch, please locate the controller installation path for the Log file.\n \n* If it's not a launch issue, you can export the Log file and Backup Config file to the local network.\n \n * For Omada Controller v5.8 or later version,\n \n In the **_Global View_**, go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. On the same page, scroll down to Export for Support, then click Export Running Logs to download the desensitized Log file.\n \n * For Omada Controller v5.6 or v5.7, \n \n Go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. On the same page, scroll down to Export for Support, then click Export Running Logs to download the desensitized Log file.\n \n * For Omada Controller v5.5 or a previous version,\n \n Go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. Go to **_Settings > Services > Export Data > Running Log_** to export the Log file.\n \n\nUpdate Log\n==========\n\n### Apr 30th, 2026\n\nRemove the download links.\n\nPlease go to the [official website](https://support.omadanetworks.com/en/product/omada-software-controller/?resourceType=download) to download the latest versions.\n\n### Apr 17th, 2026\n\nProvide the following firmware:\n\nOmada\\_Network\\_Application\\_v6.2.10.15 Windows (Windows 10/11/Server, 64-bit Recommended)\n\nOmada\\_Network\\_Application\\_v6.2.10.15 \\_linux\\_x64.tar.gz\n\nOmada\\_Network\\_Application\\_v6.2.10.15 \\_linux\\_x64.deb\n\nUpdate Note:\n\nFixed some known issues.\n\n### Apr 10th, 2026\n\nRemove point 12&13 from the New Features section.\n\n### Apr 3rd, 2026\n\nUpdate the firmware to the following versions:\n\nOmada\\_Network\\_Application\\_v6.2.10.11 Windows (Windows 10/11/Server, 64-bit Recommended)\n\nOmada\\_Network\\_Application\\_v6.2.10.11 \\_linux\\_x64.tar.gz\n\nOmada\\_Network\\_Application\\_v6.2.10.11 \\_linux\\_x64.deb\n\n**Update Note:**\n\nFixed some known issues.\n\n### Mar 30th, 2026\n\nProvide the following firmware:\n\nOmada\\_Network\\_Application\\_v6.2.10.9 Windows (Windows 10/11/Server, 64-bit Recommended)\n\nOmada\\_Network\\_Application\\_v6.2.10.9 \\_linux\\_x64.tar.gz\n\nOmada\\_Network\\_Application\\_v6.2.10.9 \\_linux\\_x64.deb\n\n**Recommended Threads**\n=======================\n\n**[EAP7xx Fully Adapted to Omada 6.2 Pre-release Firmware (Released on 23rd Jan, 2026)](https://community.tp-link.com/en/business/forum/topic/855714)**\n\n**[Hardware Controllers Omada SDN Controller 6.2 Pre-Release Firmware (Released on 4th Mar, 2026)](https://community.tp-link.com/en/business/forum/topic/859086?page=1)**\n\n**[ER7206 V2 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857562?moduleId=794)**\n\n**[ER707-M2 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857570?moduleId=794)**\n\n**[ER7406 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857568?moduleId=794)**\n\n**[Omada SG\\_2 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 17th, 2026)](https://community.tp-link.com/en/business/forum/topic/859400?moduleId=3)**\n\n**[Omada S4500&5500 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 18th, 2026)](https://community.tp-link.com/en/business/forum/topic/860038?moduleId=3)**\n\n**[Omada SG\\_3 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 17th, 2026)](https://community.tp-link.com/en/business/forum/topic/859402?moduleId=3)**\n\nWish you a happy life and smooth network usage!  [\\>Omada US Enterprise Beta Program Launch<](https://community.tp-link.com/en/business/forum/topic/846442) [\\>Get the Latest Omada SDN Controller Releases Here<](https://community.tp-link.com/en/business/forum/topic/245226) [\\>Experience the Latest Omada EAP Firmware<](https://community.tp-link.com/en/business/forum/topic/616026)\n\nWish you a happy life and smooth network usage!  [Help Us Improve - Omada AP Installation Guide](https://community.tp-link.com/en/business/forum/topic/866618) [\\>Get the Latest Omada SDN Controller Releases Here<](https://community.tp-link.com/en/business/forum/topic/245226) [\\>Get the Latest Firmware Releases for Omada Routers Here<](https://community.tp-link.com/en/business/forum/topic/255644) [\\>Experience the Latest Omada EAP Firmware<](https://community.tp-link.com/en/business/forum/topic/616026)\n\n  1\n\nWe appreciate your feedback. Feel free to let us know more. Log in to submit feedback.\n\n     \n\n \n\n* [Facebook](https://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F860960)\n* [Linkedin](http://www.linkedin.com/shareArticle?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F860960)\n* [Twitter](http://twitter.com/share?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F860960)\n\n  1\n\nWe appreciate your feedback. Feel free to let us know more. Log in to submit feedback.\n\n     \n\n \n\n* [Facebook](https://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F860960)\n* [Linkedin](http://www.linkedin.com/shareArticle?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F860960)\n* [Twitter](http://twitter.com/share?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F860960)","body_html":"
Omada_Network_Application_V6.2.10.x Pre-Release Firmware (Closed on 30th Apr, 2026)
2026-03-30 09:48:00 - last edited 2026-04-30 01:27:44
Tags:\n

This Article Applies to

\n \n

Omada_Network_Application_v6.2.10.x_Windows (Windows 10/11/Server, 64-bit Recommended)

\n

Omada_Network_Application_v6.2.10.x_linux_x64.tar.gz

\n

Omada_Network_Application_v6.2.10.x_linux_x64.deb

\n \n

Overview

\n \n

We hope to offer you the opportunity to experience the new features added in Controller vv6.2.10.x in advance, and to allow TP-Link to thoroughly test the firmware in your real network environment and across scenarios before the official release. All feedback is welcome, including reports of successful upgrades.

\n \n \n

Release Notes

\n \n

Version Info

\n

This version of the Controller is fully compatible with the Omada App version 5.2.x or above.

\n \n

Supported Device Models

\n

For device models Omada Software Controller supports, refer to the Omada Cloud SDN Platform Compatibility List.

\n \n

New Features

\n \n
    \n
  1. Added support for Wi-Fi Calling, available at Site > Device Config > AP > Wi-Fi Calling, Site > Network Config > Network Setting > WLAN > Advanced Settings > Wi-Fi Calling. The transmission of voice and text messages over Wi-Fi networks is more stable, and a new accompanying Wi-Fi Calling statistics chart has been added. (Requires EAP firmware support)
    2. \n
  2. Added support for load balancing across access points, available at Site > Network Config > WLAN > SSID > Advanced Settings > Load Balance, balancing client distribution across access points and frequency bands to improve network performance. (Requires EAP firmware support) 
    3. \n
  3. Added support for SSID Band Steering, available at Site > Network Config > WLAN > SSID > Advanced Settings > Band Steering, the SSID configuration takes precedence over the Site configuration. (Requires EAP firmware support)
    4. \n
  4. Added support for WLAN Optimization Schedule, available at Site > Network Config > Network Setting > WLAN > WLAN Optimization > Manual WLAN Optimization > Schedule. Configuration can be done by Day, Week, and Month.
    5. \n
  5. Added support for displaying the AFC acquisition status, available at Device > Device List > AFC. (Requires EAP firmware support)
    6. \n
  6. Added support for CCI and AP Density charts, available at Site > Dashboard > Wi-Fi > WLAN Optimization. Co-channel interference (CCI) indicates the degree of interference experienced by APs on the same channel, AP density reflecting the deployment status of APs.
    7. \n
  7. Updated SD-WAN access control logic, Users must have All Sites permissions to view the SD-WAN page. SD-WAN page can be modified by Modify, Viewer only allows viewing, and Block hides.
    8. \n
  8. Added support for PVST/PVST+/PRST/RPVST+, available at Devices > Device List > Manage Device > Config > Services. The addition of RPVST improves link utilization and fault recovery speed in multi-VLAN scenarios. CIST Priority and MaxHops are not supported in this mode. (Requires Switch firmware support)
    9. \n
  9. Added support for configuring stack port speed on L3 switches, devices with different stacking port speeds can now form a stack group. Available at Devices > Device Group > Stack Group. (Requires Switch firmware support)
    10. \n
  10. Update the configuration of SNMPv3, available at Network Config > General Settings > SNMP. Added Security Level, Authentication Mode, Authentication Password, Privacy Mode and Privacy Password configurations. (Requires firmware support, Gateway support will be available in a future firmware release)
    11. \n
  11. Added support for Cloud Owner Permission Migration, available at Account > User. Local Owner and Cloud Owner users are allowed to migrate Cloud Owner to an invited Cloud user. After a successful migration, the Cloud Access user becomes the new Cloud Owner, and the original Cloud Owner is downgraded to Admin
    12. \n
  12. Added support for Backup & Restore through Cloud Access, available at Settings > Maintenance.
    13. \n
  13. Added support for Manual Upgrade via Cloud Access, available at Settings > System Settings > Manual Upgrade.
    14. \n
  14. Added Description field to Portal Access Control, available at Site > Network Config > Authentication > Portal > Access Config.
    15. \n
  15. Added support for PPSK configuration on the 6Ghz band, available at Site > Network Config > Network Settings > WLAN > SSID. (Requires EAP firmware support)
    16. \n
  16. Added support for viewing L3 switch dynamic resources, available at Devices > Device List > Manage Device > Config > General Config. Supports viewing the current device SDM template, current resource usage, total resource utilization, and remaining available resources.
    17. \n
  17. Added support for static routes in SD-WAN, allowing hubs to configure multiple non-local network routes to enable spoke devices to access hub resources for complex routing scenarios such as third-party devices or remote VPNs, available at Global > SD-WAN. (Requires Gateway firmware support)
    18. \n
\n \n

Enhancements

\n \n
    \n
  1. Optimized EAP topology identification for wired clients.
    2. \n
  2. Automatically modify the Legal DHCP server address and automatically fill in the server IP, available at Network Config > LAN.
    3. \n
  3. Optimized the entry points for Restore and Migration functions, available at Global View > Settings > Migration > Organization Migration. The Restore function can only restore backup files for the current Controller. Backup files for other Controllers can only be imported via migration.
    4. \n
  4. Optimized EAP batch configuration experience, available at Site > Devices > Batch Action > Batch Config. The display logic has been adjusted and the configuration result will now be displayed after configuration is complete.
    5. \n
  5. Optimized the display and sorting of Client and Device list.
    6. \n
  6. Optimized multiple interactions, now supports drag-and-drop selection of ports, available at Dashboard > Topology > Quick Config > Extend Mode, Port Reboot, Port Isolation and Network Wizard; Network Config > Switch ACL, Port Schedule and OUI Based VLAN.
    7. \n
  7. Optimized the Quick Setup process and simplify configuration steps.
    8. \n
  8. Optimized VLAN configuration by adding VLAN configuration to the Switch Port Profile, which in turn optimizes the Port page and VLAN page, improving configuration flexibility, available at Device Config > Switch Ports > Port Profile; Device > Manage Device > Ports; Network Config > LAN; Device Config > Switch Ports > Port Setting.
    9. \n
  9. Optimized Site Migration, an exit button has been added, the Skip button for the Export Site step has been changed to Next, and the Skip button for Migrate Site has been removed, available at Global View > Settings > Migration > Site Migration.
    10. \n
  10. Optimized Lock to EAP function, when the Lock AP configured by the Client is offline, the Client can connect to others under the Site.
    11. \n
  11. Other feature optimizations include improved Cloud Access connection speed, faster page load times, and enhanced Portal authentication page performance.
    12. \n
\n \n

Notes

\n \n
    \n
  1. Please note that Controllers on different platforms may vary in features, even if their first three digits of the version code are the same. For example, the Linux Controller currently supports Cluster Mode, but the Windows Controller doesn't support it yet.
    2. \n
  2. The Omada SDN Controller can only manage specific devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.
    3. \n
  3. Since version 5.14.32, the Omada Software Controller no longer supports upgrading from Controller v4.
    4. \n
  4. To strengthen overall security, we recommend upgrading all devices to the latest firmware.
    5. \n
\n \n

 

\n

Firmware Download

\n \n

Before the Upgrade

\n

(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!

\n

(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.

\n

(3) You may follow the following guide to upgrade your Omada Controller. How to Upgrade or Downgrade Omada SDN Controller.

\n

 

\n

Firmware Download Link

\n \n

Direct Download

\n \n

Omada_Network_Application_v6.2.10.15 Windows (Windows 10/11/Server, 64-bit Recommended)

\n

Omada_Network_Application_v6.2.10.15 _linux_x64.tar.gz

\n

Omada_Network_Application_v6.2.10.15 _linux_x64.deb
 

\n \n

Omada_Network_Application_v6.2.10.11 Windows (Windows 10/11/Server, 64-bit Recommended)

\n

Omada_Network_Application_v6.2.10.11 _linux_x64.tar.gz

\n

Omada_Network_Application_v6.2.10.11 _linux_x64.deb

\n \n

Omada_Network_Application_v6.2.10.9 Windows (Windows 10/11/Server, 64-bit Recommended)

\n

Omada_Network_Application_v6.2.10.9 _linux_x64.tar.gz

\n

Omada_Network_Application_v6.2.10.9 _linux_x64.deb

\n \n \n \n

Additional Information

\n \n

If somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:

\n \n \n

If you decide to downgrade the controller before reporting the issue to TP-Link, it's recommended to save a copy of the current Log file and Backup Config file, which could help TP-Link investigate and address the problem quickly.

\n \n

>> How to get the Log file and Backup Config file for Omada SDN Controller:

\n \n \n \n

Update Log

\n \n

Apr 30th, 2026

\n

Remove the download links.

\n

Please go to the official website to download the latest versions.

\n \n \n

Apr 17th, 2026

\n

Provide the following firmware:

\n

Omada_Network_Application_v6.2.10.15 Windows (Windows 10/11/Server, 64-bit Recommended)

\n

Omada_Network_Application_v6.2.10.15 _linux_x64.tar.gz

\n

Omada_Network_Application_v6.2.10.15 _linux_x64.deb

\n \n

Update Note:

\n

Fixed some known issues.

\n

 

\n

Apr 10th, 2026

\n

Remove point 12&13 from the New Features section.

\n \n

Apr 3rd, 2026

\n

Update the firmware to the following versions:

\n

Omada_Network_Application_v6.2.10.11 Windows (Windows 10/11/Server, 64-bit Recommended)

\n

Omada_Network_Application_v6.2.10.11 _linux_x64.tar.gz

\n

Omada_Network_Application_v6.2.10.11 _linux_x64.deb

\n \n

Update Note:

\n

Fixed some known issues.

\n \n \n

Mar 30th, 2026

\n

Provide the following firmware:

\n

Omada_Network_Application_v6.2.10.9 Windows (Windows 10/11/Server, 64-bit Recommended)

\n

Omada_Network_Application_v6.2.10.9 _linux_x64.tar.gz

\n

Omada_Network_Application_v6.2.10.9 _linux_x64.deb

\n \n \n

Recommended Threads

\n \n

EAP7xx Fully Adapted to Omada 6.2 Pre-release Firmware (Released on 23rd Jan, 2026)

\n

Hardware Controllers Omada SDN Controller 6.2 Pre-Release Firmware (Released on 4th Mar, 2026)

\n

ER7206 V2 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

ER707-M2 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

ER7406 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

Omada SG_2 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 17th, 2026)

\n

Omada S4500&5500 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 18th, 2026)

\n

Omada SG_3 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 17th, 2026)

\n \n \n

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<

\nWish you a happy life and smooth network usage! \nHelp Us Improve - Omada AP Installation Guide\n>Get the Latest Omada SDN Controller Releases Here<\n>Get the Latest Firmware Releases for Omada Routers Here<\n>Experience the Latest Omada EAP Firmware<
  1
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
     
 
  1
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
     
 
","link":"https://community.tp-link.com/en/business/forum/topic/860960","summary":"Omada_Network_Application_V6.2.10.x Pre-Release Firmware (Updated on 17th Apr, 2026)","type":"software","version":"6.2.10.x","platform":"unknown","date":"2026-04-17T00:00:00.000Z"},{"body":"ER7212PC V2 (Built-in Omada SDN Controller 6.2) Pre-Release Firmware (Closed)\n\n2026-03-19 01:30:39 - last edited 2026-05-19 01:53:32\n\nTags:\n\nThis Article Applies to\n=======================\n\nER7212PC V2 v2.4.x pre-release (Built-in Omada SDN Controller 6.2)\n\nOverview\n========\n\nWe hope to offer you the opportunity to experience the new features added in Controller v6.2 in advance, and to allow TP-Link to thoroughly test the firmware in your real network environment and across scenarios before the official release. All feedback is welcome, including reports of successful upgrades.\n\nRelease Notes\n=============\n\nVersion Info\n------------\n\nThis version of the Controller is fully compatible with the Omada App version 5.0.x or later.\n\nSupported Device Models\n-----------------------\n\nFor device models Omada Software Controller supports, refer to the **[Omada Cloud SDN Platform Compatibility List](https://www.tp-link.com/en/omada-sdn/product-list/).**\n\nAdded support for Access Points: Flex Bridge 5.\n\n**New Features**\n----------------\n\n1. Added support for configurable WAN-port PVID on gateways running firmware 6.2 in Devices > Gateway Details > Ports.\n2. Added support for FTP and SIP ALG settings, including editable FTP/SIP signaling ports, protocol type, peer-to-peer restriction, inactivity timers, and media timeout, for gateways on firmware 6.2 in Network Config > Transmission > NAT > ALG.\n3. Added support for e-mail alerts when new firmware is available in Firmware > Overview > Upgrade Settings: users can subscribe to any channel (default Stable) and receive automatic notifications whenever subscribed channels release new firmware images for devices on the controller, provided the mail server is configured\n4. Added support for a reorganized VPN management page in Network Config > VPN that unifies the entry workflow, maps legacy SSL VPN Server/User and WireGuard pages into the new structure, and expands WireGuard to server, client and auto site-to-site scenarios(requires Gateway 6.2 firmware).\n5. Added support for configuring multiple DHCP address ranges within a single VLAN in site - Network Config > LAN > VLAN (requires Gateway 6.2 firmware).\n6. Added support for allowing the number of local and remote subnets in VPN tunnels to scale to the limit advertised by the device firmware in Network Config > VPN > VPN (requires Gateway 6.2 firmware).\n7. Added support for IPv4-over-IPv6 dial-up modes of MAP-E and DS-Lite on WAN interfaces, including optional custom DS-Lite domain names, in Network Config > Network Settings > Internet.  Enabling these modes automatically activates IPv6. Some functions are not supported for DS-Lite and MAP-E dialing, including VPN, SD-WAN, IGMP, DDNS, UPnP, Disable NAT, Port Forwarding, and NAT ALG. (requires Gateway 6.2 firmware).\n8. Added support for a new DHCP User List page on the gateway that displays all active DHCP clients when the gateway operates as the DHCP server in Gateway Details > Network View > DHCP User List (requires Gateway 6.2 firmware).\n9. Added support for one-click creation of DHCP reservations from the DHCP User List, allowing administrators to import existing leases directly into the reservation table in Network Config > Transmission > DHCP Reservation > Add From DHCP User List.\n10. Added support for Hotspot Viewer accounts to print voucher codes directly from the voucher list in Hotspot > Vouchers > Voucher Groups.\n11. Added support for configurable DNS cache lifetime by adding a TTL setting to LAN DNS in Network Config > Network Settings > LAN - LAN DNS (requires Gateway 6.2 firmware).\n12. Added support for remote packet capture on gateway WAN ports or VLANs to aid network diagnostics in Network Tools > Packet Capture (requires gateway 6.2 firmware).\n13. Added support for rogue-DHCP-server detection: the gateway raises an alert whenever an unexpected DHCP server is detected on the LAN in Logs > Alerts (requires gateway 6.2 firmware).\n14. Added support for cloud-based remote access (NAT traversal) that lets administrators reach HTTP/HTTPS services on private-LAN devices through a cloud-connected jump host, available for gateway 6.2 firmware and select switch/AP 6.2 builds in Network Tools > Remote Access and Client Details > Toolbox > Remote Access (Cloud Access must be enabled for Local Controller).\n15. Added support for on-device DNS resolution to query domain-to-IP mappings directly from the gateway in Network Tools > Network Check > DNS Lookup (requires gateway 6.2 firmware).\n16. Added support for LAN-side IP-conflict detection; the gateway logs an alert whenever multiple MACs are detected using the same IP in Logs > Alerts (requires gateway 6.2 firmware).\n17. Added support for Timing-based link-back (failover): users can configure a time range after which traffic automatically fails back to the standby WAN, supplementing the existing failover modes in Site > Network Config > Network Settings > Internet (requires gateway 6.2 firmware).\n18. Added support for on-demand Speedtest in Site > Dashboard and scheduled Speedtest in Site > Network Config > Network Settings > Internet: initiate a test on any WAN or set daily/weekly/monthly schedules; results are graphed and stored historically (requires gateway 6.2 firmware).\n19. Added support for extending configurable VLANs up to 4094 on gateways, covering WAN, LAN, virtual-WAN and IPTV interfaces in Site > Network Config > Network Settings > Internet/LAN/IPTV (requires gateway 6.2 firmware).\n20. Added support for displaying the last-edit timestamp on each portal entry in Network Config > Authentication > Portal.\n21. Added support for showing voucher balance and quota-limit reminders on the portal post-auth success page, along with remaining session time and, if rate-limiting is enabled, remaining data for both voucher and local-user logins on the client success page after authentication.\n22. Added support for uploading separate background images for mobile and PC endpoints when creating or editing a portal in Network Config > Authentication > Portal > Add/Edit Portal > Design > Background > Unified Picture.\n23. Added support for using a hostname instead of an IP address for the RADIUS server in portal authentication in Network Config > Authentication > Portal.\n24. Added support for voucher statistics grouped by voucher group, letting administrators view usage totals per group in Hotspot > Vouchers > Statistics.\n25. Added support for LAN Network/VLAN columns in user tables, showing the network and VLAN where each client resides in Dashboard > Traffic > Clients and Insights > Application Analytics > Users.\n26. Added support for managing Pro/Campus devices within Omada Controller, enabling discovery, adoption, offline provisioning, site templates and mixed-mesh deployment, while health metrics, anomaly events and Heat-Map Pro models remain unavailable in Site > Device.\n27. Added support for displaying the timestamp and status of the latest GPS fix (manual or automatic) on EAP772-Outdoor in AP Details > Config > General (requires EAP772-Outdoor firmware 6.2).\n28. Added support for configuring a NAS-ID in switch 802.1X authentication in Network Config > Authentication > 802.1X (requires switch firmware 6.2).\n29. Added support for VLAN assignment when MAC-based authentication is selected in switch 802.1X in Network Config > Authentication > 802.1X (requires switch firmware 6.2).\n30. Added support for choosing hybrid mode (802.1X first, MAB on failure), displaying downstream devices on switch ports, and configuring a guest VLAN in Network Config > Authentication > 802.1X (requires switch firmware 6.2).\n31. Added support for transparent SSDP forwarding when both IGMP Snooping and unknown-multicast discard are active by introducing the \"Flood Known Protocols\" option in Network Config > Network Settings > LAN > Multicast Snooping (requires Switch 6.2 firmware).\n32. Added support for real-time LACP member-status indication: LAG list now shows green for successfully negotiated, up members and red for failed members, with failure logs sent by the switch and stored in the Controller in Switch Details > Ports > LAG List (requires Switch 6.2 firmware).\n33. Added support for in-place toggling between Active and Passive LACP modes without deleting and recreating the LAG; Static LAG mode remains unchanged in Switch Details > Ports > LAG Detail (requires Switch 6.2 firmware).\n34. Added support for displaying the last-known uplink device and uplink port columns in the device list, preserving this information even after the device goes offline in Devices > Device List.\n35. Added support for configuring multiple DHCP-relay server addresses on a Switch VLAN interface (quantity limited by hardware) in Switch Details > Config > VLAN Interface > DHCP Relay (requires Switch 6.2 firmware).\n36. Added support for VLAN-aware topology highlighting: links in the VLAN topology diagram now change color to indicate whether the selected VLAN’s traffic can traverse each connection in Network Config > Network Settings > LAN and Dashboard > Topology.\n37. Added support for SDM template integration, allowing administrators to view and modify SDM template options directly within switch device templates in Site Template > Device Template (switch) > Config > General > Others > SDM Template (requires Switch 6.2 firmware; supported models listed).\n\n**Enhancements**\n----------------\n\n1. Optimize startup time\n2. Enhancement of System Stability\n3. Optimize the efficiency of network configuration deployment\n4. Optimization of resource utilization for traffic statistics\n5. Load Balance Configuration Optimization\n6. Simplification of VPN configuration and optimization of configuration efficiency\n7. Optimized the Internet page by moving Virtual WAN under Port Config and merging the separate Port Config and Load Balancing submit buttons into a single bottom action in Site > Network Config > Network Settings > Internet.\n8. Optimized Load Balancing logic to apply device-side settings when WAN Settings Overrides is disabled and added real-time port-status indicators under each WAN weight field to prevent user confusion in Site > Network Config > Network Settings > Internet > Load Balancing (requires gateway 6.2 firmware).\n9. Optimized Portal creation/editing with a rebuilt layout that groups settings more intuitively and exposes additional component-customization options in Network Config > Authentication > Portal.\n10. Optimized IP-input fields throughout the UI to accept a copied IP address pasted as a single string.\n11. Optimized Cloud Access with a redesigned connection flow that reduces cloud-request latency and improves overall user experience in Settings > Cloud Access.\n12. Optimized the DPI Rules Management page by replacing the single QoS toggle with a type selector that lets users choose between ACL and QoS rule types in Site > Network Config > Security > Application Control > Rules Management.\n13. Optimized controller security with built-in brute-force protection that locks login attempts after repeated password failures on \"managed by other\" devices in Controller (available now for AP & Gateway; Switch & OLT support planned for firmware 6.3).\n14. Optimized public OpenAPI documentation by completing deprecated-interface descriptions and correcting the categorization of site-template endpoints.\n\n**Bug Fixed**\n=============\n\n1. Resolve the issue of abnormal display of the SN code.\n2. Fixed bug where RADIUS Message-Authenticator was not forcibly validated, which could lead to RADIUS protocol security vulnerability (CVE-2024-3596), by adding support for enforcing Message-Authenticator verification when the “Require Message-Authenticator” option is enabled, in Site > Network Config > Profile > RADIUS Profile and Global/MSP > Settings > Server Settings > RADIUS Server.\n3. Fixed bug where RADIUS packets containing the Proxy-State attribute did not enforce Message-Authenticator validation, potentially exposing the system to RADIUS protocol security vulnerability (CVE-2024-3596), by adding support for limiting Proxy-State and enforcing Message-Authenticator verification when the “Limit Proxy-State” option is enabled, in Site > Network Config > Profile > RADIUS Profile and Global/MSP > Settings > Server Settings > RADIUS Server.\n\n**Notes**\n=========\n\n1. Please note that Controllers on different platforms may vary in features, even if their first three digits of the version code are the same. For example, the Linux Controller currently supports Cluster Mode, but the Windows Controller doesn't support it yet.\n2. The Omada SDN Controller can only manage specific devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.\n3. Since version 5.14.32, the Omada Software Controller no longer supports upgrading from Controller v4.\n4. To strengthen overall security, we recommend upgrading all devices to the latest firmware.\n\nFirmware Download\n=================\n\n### **Before the Upgrade**\n\n(1) Please be sure you have read the [Beta Test Agreement](https://community.tp-link.com/en/business/forum/topic/275514) before upgrading the Pre-release firmware!\n\n(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.\n\n(3) You may follow the following guide to upgrade your Omada Controller. **[How to Upgrade or Downgrade Omada SDN Controller](https://community.tp-link.com/en/business/forum/topic/616596).**\n\n### **Firmware Download Link**\n\n**Direct Download**\n\nER7212PC\\_v2\\_2.4.1 (pre-release version) > Built-in Omada SDN Controller 6.2\n\nER7212PC\\_v2\\_2.4.0 (pre-release version) > Built-in Omada SDN Controller 6.2\n\n### Additional Information\n\nIf somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:\n\n* **Omada Controller version** _(previous and current)_\n* **Device Model(s), Hardware and Firmware versions**\n* (if possible) A copy of the **Log file** and **Backup Config** **file**\n\nIf you decide to downgrade the controller before reporting the issue to TP-Link, it's recommended to save a copy of the current Log file and Backup Config file, which could help TP-Link investigate and address the problem quickly.\n\n\\>> How to get the **Log file** and **Backup Config file** for Omada SDN Controller:\n\n* If your Windows software controller failed to launch, please locate the controller installation path for the Log file.\n \n* If it's not a launch issue, you can export the Log file and Backup Config file to the local network.\n \n * For Omada Controller v5.8 or later version,\n \n In the **_Global View_**, go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. On the same page, scroll down to Export for Support, then click Export Running Logs to download the desensitized Log file.\n \n * For Omada Controller v5.6 or v5.7, \n \n Go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. On the same page, scroll down to Export for Support, then click Export Running Logs to download the desensitized Log file.\n \n * For Omada Controller v5.5 or a previous version,\n \n Go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. Go to **_Settings > Services > Export Data > Running Log_** to export the Log file.\n \n\nUpdate Log\n==========\n\n### **Apr 30th, 2026**\n\nRemove the download link. To download the latest version, please go to the [official website](https://support.omadanetworks.com/en/product/er7212pc/v2/?resourceType=download).\n\n### **Apr 2nd, 2026**\n\nUpdate the following firmware:\n\nER7212PC\\_v2\\_2.4.1 (pre-release version) > Built-in Omada SDN Controller 6.2\n\nUpdate note:\n\nFixed some known issues.\n\n### **Mar 19th, 2026**\n\nProvide the following firmware:\n\nER7212PC\\_v2\\_2.4.0 (pre-release version) > Built-in Omada SDN Controller 6.2\n\n**Recommended Threads**\n=======================\n\n**[EAP7xx Fully Adapted to Omada 6.2 Pre-release Firmware (Released on 23rd Jan, 2026)](https://community.tp-link.com/en/business/forum/topic/855714)**\n\n**[Omada\\_Network\\_Application\\_V6.2.x.x Pre-Release Firmware (Released on 11th Feb, 2026)](https://community.tp-link.com/en/business/forum/topic/857494?moduleId=582)**\n\n**[ER7206 V2 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857562?moduleId=794)**\n\n**[ER707-M2 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857570?moduleId=794)**\n\n**[ER7406 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857568?moduleId=794)**\n\n**[Omada SG\\_2 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 17th, 2026)](https://community.tp-link.com/en/business/forum/topic/859400?moduleId=3)**\n\n**[Omada S4500&5500 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 18th, 2026)](https://community.tp-link.com/en/business/forum/topic/860038?moduleId=3)**\n\n**[Omada SG\\_3 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 17th, 2026)](https://community.tp-link.com/en/business/forum/topic/859402?moduleId=3)**\n\nWish you a happy life and smooth network usage!  [\\>Omada US Enterprise Beta Program Launch<](https://community.tp-link.com/en/business/forum/topic/846442) [\\>Get the Latest Omada SDN Controller Releases Here<](https://community.tp-link.com/en/business/forum/topic/245226) [\\>Experience the Latest Omada EAP Firmware<](https://community.tp-link.com/en/business/forum/topic/616026)\n\nWish you a happy life and smooth network usage!  [Help Us Improve - Omada AP Installation Guide](https://community.tp-link.com/en/business/forum/topic/866618) [\\>Get the Latest Omada SDN Controller Releases Here<](https://community.tp-link.com/en/business/forum/topic/245226) [\\>Get the Latest Firmware Releases for Omada Routers Here<](https://community.tp-link.com/en/business/forum/topic/255644) [\\>Experience the Latest Omada EAP Firmware<](https://community.tp-link.com/en/business/forum/topic/616026)\n\n  0\n\nWe appreciate your feedback. Feel free to let us know more. Log in to submit feedback.\n\n     \n\n \n\n* [Facebook](https://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F860114)\n* [Linkedin](http://www.linkedin.com/shareArticle?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F860114)\n* [Twitter](http://twitter.com/share?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F860114)\n\n  0\n\nWe appreciate your feedback. Feel free to let us know more. Log in to submit feedback.\n\n     \n\n \n\n* [Facebook](https://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F860114)\n* [Linkedin](http://www.linkedin.com/shareArticle?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F860114)\n* [Twitter](http://twitter.com/share?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F860114)","body_html":"
ER7212PC V2 (Built-in Omada SDN Controller 6.2) Pre-Release Firmware (Closed)
2026-03-19 01:30:39 - last edited 2026-05-19 01:53:32
Tags:\n

This Article Applies to

\n \n

ER7212PC V2 v2.4.x pre-release (Built-in Omada SDN Controller 6.2)

\n \n

Overview

\n \n

We hope to offer you the opportunity to experience the new features added in Controller v6.2 in advance, and to allow TP-Link to thoroughly test the firmware in your real network environment and across scenarios before the official release. All feedback is welcome, including reports of successful upgrades.

\n \n

Release Notes

\n \n

Version Info

\n

This version of the Controller is fully compatible with the Omada App version 5.0.x or later.

\n \n

Supported Device Models

\n

For device models Omada Software Controller supports, refer to the Omada Cloud SDN Platform Compatibility List.

\n \n

Added support for Access Points: Flex Bridge 5.

\n \n

New Features

\n \n
    \n
  1. Added support for configurable WAN-port PVID on gateways running firmware 6.2 in Devices > Gateway Details > Ports.
    2. \n
  2. Added support for FTP and SIP ALG settings, including editable FTP/SIP signaling ports, protocol type, peer-to-peer restriction, inactivity timers, and media timeout, for gateways on firmware 6.2 in Network Config > Transmission > NAT > ALG.
    3. \n
  3. Added support for e-mail alerts when new firmware is available in Firmware > Overview > Upgrade Settings: users can subscribe to any channel (default Stable) and receive automatic notifications whenever subscribed channels release new firmware images for devices on the controller, provided the mail server is configured
    4. \n
  4. Added support for a reorganized VPN management page in Network Config > VPN that unifies the entry workflow, maps legacy SSL VPN Server/User and WireGuard pages into the new structure, and expands WireGuard to server, client and auto site-to-site scenarios(requires Gateway 6.2 firmware).
    5. \n
  5. Added support for configuring multiple DHCP address ranges within a single VLAN in site - Network Config > LAN > VLAN (requires Gateway 6.2 firmware).
    6. \n
  6. Added support for allowing the number of local and remote subnets in VPN tunnels to scale to the limit advertised by the device firmware in Network Config > VPN > VPN (requires Gateway 6.2 firmware).
    7. \n
  7. Added support for IPv4-over-IPv6 dial-up modes of MAP-E and DS-Lite on WAN interfaces, including optional custom DS-Lite domain names, in Network Config > Network Settings > Internet.  Enabling these modes automatically activates IPv6. Some functions are not supported for DS-Lite and MAP-E dialing, including VPN, SD-WAN, IGMP, DDNS, UPnP, Disable NAT, Port Forwarding, and NAT ALG. (requires Gateway 6.2 firmware).
    8. \n
  8. Added support for a new DHCP User List page on the gateway that displays all active DHCP clients when the gateway operates as the DHCP server in Gateway Details > Network View > DHCP User List (requires Gateway 6.2 firmware).
    9. \n
  9. Added support for one-click creation of DHCP reservations from the DHCP User List, allowing administrators to import existing leases directly into the reservation table in Network Config > Transmission > DHCP Reservation > Add From DHCP User List.
    10. \n
  10. Added support for Hotspot Viewer accounts to print voucher codes directly from the voucher list in Hotspot > Vouchers > Voucher Groups.
    11. \n
  11. Added support for configurable DNS cache lifetime by adding a TTL setting to LAN DNS in Network Config > Network Settings > LAN - LAN DNS (requires Gateway 6.2 firmware).
    12. \n
  12. Added support for remote packet capture on gateway WAN ports or VLANs to aid network diagnostics in Network Tools > Packet Capture (requires gateway 6.2 firmware).
    13. \n
  13. Added support for rogue-DHCP-server detection: the gateway raises an alert whenever an unexpected DHCP server is detected on the LAN in Logs > Alerts (requires gateway 6.2 firmware).
    14. \n
  14. Added support for cloud-based remote access (NAT traversal) that lets administrators reach HTTP/HTTPS services on private-LAN devices through a cloud-connected jump host, available for gateway 6.2 firmware and select switch/AP 6.2 builds in Network Tools > Remote Access and Client Details > Toolbox > Remote Access (Cloud Access must be enabled for Local Controller).
    15. \n
  15. Added support for on-device DNS resolution to query domain-to-IP mappings directly from the gateway in Network Tools > Network Check > DNS Lookup (requires gateway 6.2 firmware).
    16. \n
  16. Added support for LAN-side IP-conflict detection; the gateway logs an alert whenever multiple MACs are detected using the same IP in Logs > Alerts (requires gateway 6.2 firmware).
    17. \n
  17. Added support for Timing-based link-back (failover): users can configure a time range after which traffic automatically fails back to the standby WAN, supplementing the existing failover modes in Site > Network Config > Network Settings > Internet (requires gateway 6.2 firmware).
    18. \n
  18. Added support for on-demand Speedtest in Site > Dashboard and scheduled Speedtest in Site > Network Config > Network Settings > Internet: initiate a test on any WAN or set daily/weekly/monthly schedules; results are graphed and stored historically (requires gateway 6.2 firmware).
    19. \n
  19. Added support for extending configurable VLANs up to 4094 on gateways, covering WAN, LAN, virtual-WAN and IPTV interfaces in Site > Network Config > Network Settings > Internet/LAN/IPTV (requires gateway 6.2 firmware).
    20. \n
  20. Added support for displaying the last-edit timestamp on each portal entry in Network Config > Authentication > Portal.
    21. \n
  21. Added support for showing voucher balance and quota-limit reminders on the portal post-auth success page, along with remaining session time and, if rate-limiting is enabled, remaining data for both voucher and local-user logins on the client success page after authentication.
    22. \n
  22. Added support for uploading separate background images for mobile and PC endpoints when creating or editing a portal in Network Config > Authentication > Portal > Add/Edit Portal > Design > Background > Unified Picture.
    23. \n
  23. Added support for using a hostname instead of an IP address for the RADIUS server in portal authentication in Network Config > Authentication > Portal.
    24. \n
  24. Added support for voucher statistics grouped by voucher group, letting administrators view usage totals per group in Hotspot > Vouchers > Statistics.
    25. \n
  25. Added support for LAN Network/VLAN columns in user tables, showing the network and VLAN where each client resides in Dashboard > Traffic > Clients and Insights > Application Analytics > Users.
    26. \n
  26. Added support for managing Pro/Campus devices within Omada Controller, enabling discovery, adoption, offline provisioning, site templates and mixed-mesh deployment, while health metrics, anomaly events and Heat-Map Pro models remain unavailable in Site > Device.
    27. \n
  27. Added support for displaying the timestamp and status of the latest GPS fix (manual or automatic) on EAP772-Outdoor in AP Details > Config > General (requires EAP772-Outdoor firmware 6.2).
    28. \n
  28. Added support for configuring a NAS-ID in switch 802.1X authentication in Network Config > Authentication > 802.1X (requires switch firmware 6.2).
    29. \n
  29. Added support for VLAN assignment when MAC-based authentication is selected in switch 802.1X in Network Config > Authentication > 802.1X (requires switch firmware 6.2).
    30. \n
  30. Added support for choosing hybrid mode (802.1X first, MAB on failure), displaying downstream devices on switch ports, and configuring a guest VLAN in Network Config > Authentication > 802.1X (requires switch firmware 6.2).
    31. \n
  31. Added support for transparent SSDP forwarding when both IGMP Snooping and unknown-multicast discard are active by introducing the \"Flood Known Protocols\" option in Network Config > Network Settings > LAN > Multicast Snooping (requires Switch 6.2 firmware).
    32. \n
  32. Added support for real-time LACP member-status indication: LAG list now shows green for successfully negotiated, up members and red for failed members, with failure logs sent by the switch and stored in the Controller in Switch Details > Ports > LAG List (requires Switch 6.2 firmware).
    33. \n
  33. Added support for in-place toggling between Active and Passive LACP modes without deleting and recreating the LAG; Static LAG mode remains unchanged in Switch Details > Ports > LAG Detail (requires Switch 6.2 firmware).
    34. \n
  34. Added support for displaying the last-known uplink device and uplink port columns in the device list, preserving this information even after the device goes offline in Devices > Device List.
    35. \n
  35. Added support for configuring multiple DHCP-relay server addresses on a Switch VLAN interface (quantity limited by hardware) in Switch Details > Config > VLAN Interface > DHCP Relay (requires Switch 6.2 firmware).
    36. \n
  36. Added support for VLAN-aware topology highlighting: links in the VLAN topology diagram now change color to indicate whether the selected VLAN’s traffic can traverse each connection in Network Config > Network Settings > LAN and Dashboard > Topology.
    37. \n
  37. Added support for SDM template integration, allowing administrators to view and modify SDM template options directly within switch device templates in Site Template > Device Template (switch) > Config > General > Others > SDM Template (requires Switch 6.2 firmware; supported models listed).
    38. \n
\n

 

\n

 

\n

Enhancements

\n \n
    \n
  1. Optimize startup time
    2. \n
  2. Enhancement of System Stability
    3. \n
  3. Optimize the efficiency of network configuration deployment
    4. \n
  4. Optimization of resource utilization for traffic statistics
    5. \n
  5. Load Balance Configuration Optimization
    6. \n
  6. Simplification of VPN configuration and optimization of configuration efficiency
    7. \n
  7. Optimized the Internet page by moving Virtual WAN under Port Config and merging the separate Port Config and Load Balancing submit buttons into a single bottom action in Site > Network Config > Network Settings > Internet.
    8. \n
  8. Optimized Load Balancing logic to apply device-side settings when WAN Settings Overrides is disabled and added real-time port-status indicators under each WAN weight field to prevent user confusion in Site > Network Config > Network Settings > Internet > Load Balancing (requires gateway 6.2 firmware).
    9. \n
  9. Optimized Portal creation/editing with a rebuilt layout that groups settings more intuitively and exposes additional component-customization options in Network Config > Authentication > Portal.
    10. \n
  10. Optimized IP-input fields throughout the UI to accept a copied IP address pasted as a single string.
    11. \n
  11. Optimized Cloud Access with a redesigned connection flow that reduces cloud-request latency and improves overall user experience in Settings > Cloud Access.
    12. \n
  12. Optimized the DPI Rules Management page by replacing the single QoS toggle with a type selector that lets users choose between ACL and QoS rule types in Site > Network Config > Security > Application Control > Rules Management.
    13. \n
  13. Optimized controller security with built-in brute-force protection that locks login attempts after repeated password failures on \"managed by other\" devices in Controller (available now for AP & Gateway; Switch & OLT support planned for firmware 6.3).
    14. \n
  14. Optimized public OpenAPI documentation by completing deprecated-interface descriptions and correcting the categorization of site-template endpoints.
    15. \n
\n \n

Bug Fixed

\n \n
    \n
  1. Resolve the issue of abnormal display of the SN code.
    2. \n
  2. Fixed bug where RADIUS Message-Authenticator was not forcibly validated, which could lead to RADIUS protocol security vulnerability (CVE-2024-3596), by adding support for enforcing Message-Authenticator verification when the “Require Message-Authenticator” option is enabled, in Site > Network Config > Profile > RADIUS Profile and Global/MSP > Settings > Server Settings > RADIUS Server.
    3. \n
  3. Fixed bug where RADIUS packets containing the Proxy-State attribute did not enforce Message-Authenticator validation, potentially exposing the system to RADIUS protocol security vulnerability (CVE-2024-3596), by adding support for limiting Proxy-State and enforcing Message-Authenticator verification when the “Limit Proxy-State” option is enabled, in Site > Network Config > Profile > RADIUS Profile and Global/MSP > Settings > Server Settings > RADIUS Server.
    4. \n
\n \n

Notes

\n \n
    \n
  1. Please note that Controllers on different platforms may vary in features, even if their first three digits of the version code are the same. For example, the Linux Controller currently supports Cluster Mode, but the Windows Controller doesn't support it yet.
    2. \n
  2. The Omada SDN Controller can only manage specific devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.
    3. \n
  3. Since version 5.14.32, the Omada Software Controller no longer supports upgrading from Controller v4.
    4. \n
  4. To strengthen overall security, we recommend upgrading all devices to the latest firmware.
    5. \n
\n \n

 

\n

Firmware Download

\n \n

Before the Upgrade

\n

(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!

\n

(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.

\n

(3) You may follow the following guide to upgrade your Omada Controller. How to Upgrade or Downgrade Omada SDN Controller.

\n

 

\n

Firmware Download Link

\n \n

Direct Download

\n \n

ER7212PC_v2_2.4.1 (pre-release version) > Built-in Omada SDN Controller 6.2

\n \n

ER7212PC_v2_2.4.0 (pre-release version) > Built-in Omada SDN Controller 6.2

\n \n \n

Additional Information

\n \n

If somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:

\n \n \n

If you decide to downgrade the controller before reporting the issue to TP-Link, it's recommended to save a copy of the current Log file and Backup Config file, which could help TP-Link investigate and address the problem quickly.

\n \n

>> How to get the Log file and Backup Config file for Omada SDN Controller:

\n \n \n \n

Update Log

\n

Apr 30th, 2026

\n

Remove the download link. To download the latest version, please go to the official website.

\n \n

Apr 2nd, 2026

\n

 

\n
Update the following firmware:
\n

ER7212PC_v2_2.4.1 (pre-release version) > Built-in Omada SDN Controller 6.2

\n \n

Update note:

\n

Fixed some known issues.

\n \n

 

\n

 

\n

Mar 19th, 2026

\n \n

Provide the following firmware:

\n

ER7212PC_v2_2.4.0 (pre-release version) > Built-in Omada SDN Controller 6.2

\n \n \n

Recommended Threads

\n \n \n

EAP7xx Fully Adapted to Omada 6.2 Pre-release Firmware (Released on 23rd Jan, 2026)

\n

Omada_Network_Application_V6.2.x.x Pre-Release Firmware (Released on 11th Feb, 2026)

\n

ER7206 V2 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

ER707-M2 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

ER7406 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

Omada SG_2 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 17th, 2026)

\n

Omada S4500&5500 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 18th, 2026)

\n

Omada SG_3 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 17th, 2026)

\n \n \n

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<

\nWish you a happy life and smooth network usage! \nHelp Us Improve - Omada AP Installation Guide\n>Get the Latest Omada SDN Controller Releases Here<\n>Get the Latest Firmware Releases for Omada Routers Here<\n>Experience the Latest Omada EAP Firmware<
  0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
     
 
  0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
     
 
","link":"https://community.tp-link.com/en/business/forum/topic/860114","summary":"ER7212PC V2 (Built-in Omada SDN Controller 6.2) Pre-Release Firmware (Update on 2nd Apr, 2026)","type":"hardware","version":"6.2","platform":"unknown","date":"2026-04-02T00:00:00.000Z"},{"body":"Hardware Controllers Omada SDN Controller 6.2.0 Pre-Release Firmware (Closed on 9th Apr, 2026)\n\n2026-03-04 07:19:15 - last edited a week ago\n\nTags:\n\nThis Article Applies to\n=======================\n\nOC200(UN)\\_V1\\_1.39.8\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC200(UN)\\_V2\\_2.24.8\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC200(UN)\\_V3\\_3.1.3\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC220(UN)\\_V1\\_1.4.8\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC220(UN)\\_V2\\_2.3.8\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC300(UN)\\_V1\\_1.33.8\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC400(UN)\\_V1\\_1.11.8\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOverview\n========\n\nWe hope to offer you the opportunity to experience the new features added in Controller v6.2.0.x in advance, and to allow TP-Link to thoroughly test the firmware in your real network environment and across scenarios before the official release. All feedback is welcome, including reports of successful upgrades.\n\nRelease Notes\n=============\n\nVersion Info\n------------\n\nThis version of the Controller is fully compatible with the Omada App version 5.0.3 or above.\n\nSupported Device Models\n-----------------------\n\nFor device models Omada Software Controller supports, refer to the **[Omada Cloud SDN Platform Compatibility List](https://www.tp-link.com/en/omada-sdn/product-list/).**\n\nAdded support for Access Points: Flex Bridge 5.\n\n**New Features**\n----------------\n\n1. Added support for configurable WAN-port PVID on gateways running firmware 6.2 in **Devices > Gateway Details > Ports**.\n2. Added support for FTP and SIP ALG settings, including editable FTP/SIP signaling ports, protocol type, peer-to-peer restriction, inactivity timers, and media timeout, for gateways on firmware 6.2 in **Network Config > Transmission > NAT > ALG**.\n3. Added support for e-mail alerts when new firmware is available in **Firmware > Overview > Upgrade Settings**: users can subscribe to any channel (default Stable) and receive automatic notifications whenever subscribed channels release new firmware images for devices on the controller, provided the mail server is configured\n4. Added support for a reorganized VPN management page **in Network Config > VPN** that unifies the entry workflow, maps legacy SSL VPN Server/User and WireGuard pages into the new structure, and expands WireGuard to server, client and auto site-to-site scenarios(requires Gateway 6.2 firmware).\n5. Added support for configuring multiple DHCP address ranges within a single VLAN **in site - Network Config > LAN > VLAN** (requires Gateway 6.2 firmware).\n6. Added support for allowing the number of local and remote subnets in VPN tunnels to scale to the limit advertised by the device firmware **in Network Config > VPN > VPN** (requires Gateway 6.2 firmware).\n7. Added support for IPv4-over-IPv6 dial-up modes of MAP-E and DS-Lite on WAN interfaces, including optional custom DS-Lite domain names, in **Network Config > Network Settings > Internet.**  Enabling these modes automatically activates IPv6. Some functions are not supported for DS-Lite and MAP-E dialing, including VPN, SD-WAN, IGMP, DDNS, UPnP, Disable NAT, Port Forwarding, and NAT ALG. (requires Gateway 6.2 firmware).\n8. Added support for a new DHCP User List page on the gateway that displays all active DHCP clients when the gateway operates as the DHCP server **in Gateway Details > Network View > DHCP User List** (requires Gateway 6.2 firmware).\n9. Added support for one-click creation of DHCP reservations from the DHCP User List, allowing administrators to import existing leases directly into the reservation table **in Network Config > Transmission > DHCP Reservation > Add From DHCP User List**.\n10. Added support for Hotspot Viewer accounts to print voucher codes directly from the voucher list **in Hotspot > Vouchers > Voucher Groups**.\n11. Added support for configurable DNS cache lifetime by adding a TTL setting to LAN DNS **in Network Config > Network Settings > LAN - LAN DNS** (requires Gateway 6.2 firmware).\n12. Added support for remote packet capture on gateway WAN ports or VLANs to aid network diagnostics **in Network Tools > Packet Capture** (requires gateway 6.2 firmware).\n13. Added support for rogue-DHCP-server detection: the gateway raises an alert whenever an unexpected DHCP server is detected on the LAN **in Logs > Alerts** (requires gateway 6.2 firmware).\n14. Added support for on-device DNS resolution to query domain-to-IP mappings directly from the gateway **in Network Tools > Network Check > DNS Lookup** (requires gateway 6.2 firmware).\n15. Added support for LAN-side IP-conflict detection; the gateway logs an alert whenever multiple MACs are detected using the same IP **in Logs > Alerts** (requires gateway 6.2 firmware).\n16. Added support for Timing-based link-back (failover): users can configure a time range after which traffic automatically fails back to the standby WAN, supplementing the existing failover modes **in Site > Network Config > Network Settings > Internet** (requires gateway 6.2 firmware).\n17. Added support for on-demand Speedtest **in Site > Dashboard** and scheduled Speedtest **in Site > Network Config > Network Settings > Internet**: initiate a test on any WAN or set daily/weekly/monthly schedules; results are graphed and stored historically (requires gateway 6.2 firmware).\n18. Added support for extending configurable VLANs up to 4094 on gateways, covering WAN, LAN, virtual-WAN and IPTV interfaces **in Site > Network Config > Network Settings > Internet/LAN/IPTV** (requires gateway 6.2 firmware).\n19. Added support for displaying the last-edit timestamp on each portal entry **in Network Config > Authentication > Portal**.\n20. Added support for showing voucher balance and quota-limit reminders on the portal post-auth success page, along with remaining session time and, if rate-limiting is enabled, remaining data for both voucher and local-user logins **on the client success page after authentication**.\n21. Added support for uploading separate background images for mobile and PC endpoints when creating or editing a portal **in Network Config > Authentication > Portal > Add/Edit Portal > Design > Background > Unified Picture**.\n22. Added support for using a hostname instead of an IP address for the RADIUS server in portal authentication **in Network Config > Authentication > Portal**.\n23. Added support for voucher statistics grouped by voucher group, letting administrators view usage totals per group **in Hotspot > Vouchers > Statistics**.\n24. Added support for LAN Network/VLAN columns in user tables, showing the network and VLAN where each client resides **in Dashboard > Traffic > Clients** and **Insights > Application Analytics > Users**.\n25. Added support for managing Pro/Campus devices within Omada Controller, enabling discovery, adoption, offline provisioning, site templates and mixed-mesh deployment, while health metrics, anomaly events and Heat-Map Pro models remain unavailable **in Site > Device**.\n26. Added support for displaying the timestamp and status of the latest GPS fix (manual or automatic) on EAP772-Outdoor **in AP Details > Config > General** (requires EAP772-Outdoor firmware 6.2).\n27. Added support for configuring a NAS-ID in switch 802.1X authentication **in Network Config > Authentication > 802.1X** (requires switch firmware 6.2).\n28. Added support for VLAN assignment when MAC-based authentication is selected in switch 802.1X **in Network Config > Authentication > 802.1X** (requires switch firmware 6.2).\n29. Added support for choosing hybrid mode (802.1X first, MAB on failure), displaying downstream devices on switch ports, and configuring a guest VLAN in Network Config > Authentication > 802.1X (requires switch firmware 6.2).\n30. Added support for transparent SSDP forwarding when both IGMP Snooping and unknown-multicast discard are active by introducing the \"Flood Known Protocols\" option **in Network Config > Network Settings > LAN > Multicast Snooping** (requires Switch 6.2 firmware).\n31. Added support for real-time LACP member-status indication: LAG list now shows green for successfully negotiated, up members and red for failed members, with failure logs sent by the switch and stored in the Controller **in Switch Details > Ports > LAG List** (requires Switch 6.2 firmware).\n32. Added support for in-place toggling between Active and Passive LACP modes without deleting and recreating the LAG; Static LAG mode remains unchanged **in Switch Details > Ports > LAG Detail** (requires Switch 6.2 firmware).\n33. Added support for displaying the last-known uplink device and uplink port columns in the device list, preserving this information even after the device goes offline **in Devices > Device List**.\n34. Added support for configuring multiple DHCP-relay server addresses on a Switch VLAN interface (quantity limited by hardware) **in Switch Details > Config > VLAN Interface > DHCP Relay** (requires Switch 6.2 firmware).\n35. Added support for VLAN-aware topology highlighting: links in the VLAN topology diagram now change color to indicate whether the selected VLAN’s traffic can traverse each connection **in Network Config > Network Settings > LAN** and **Dashboard > Topology**.\n36. Added support for SDM template integration, allowing administrators to view and modify SDM template options directly within switch device templates **in Site Template > Device Template (switch) > Config > General > Others > SDM Template** (requires Switch 6.2 firmware; supported models listed).\n37. Added support for cloud-based remote access (NAT traversal) that lets administrators reach HTTP/HTTPS services on private-LAN devices through a cloud-connected jump host, available for gateway 6.2 firmware and select switch/AP 6.2 builds in **Network Tools > Remote Access** and **Client Details > Toolbox > Remote Access** (Cloud Access must be enabled for Local Controller).\n\n**Enhancements**\n----------------\n\n1. Optimized the Internet page by moving Virtual WAN under Port Config and merging the separate Port Config and Load Balancing submit buttons into a single bottom action **in Site > Network Config > Network Settings > Internet**.\n2. Optimized Load Balancing logic to apply device-side settings when WAN Settings Overrides is disabled and added real-time port-status indicators under each WAN weight field to prevent user confusion **in Site > Network Config > Network Settings > Internet > Load Balancing** (requires gateway 6.2 firmware).\n3. Optimized Portal creation/editing with a rebuilt layout that groups settings more intuitively and exposes additional component-customization options **in Network Config > Authentication > Portal**.\n4. Optimized IP-input fields throughout the UI to accept a copied IP address pasted as a single string.\n5. Optimized Cloud Access with a redesigned connection flow that reduces cloud-request latency and improves overall user experience **in Settings > Cloud Access**.\n6. Optimized the DPI Rules Management page by replacing the single QoS toggle with a type selector that lets users choose between ACL and QoS rule types **in Site > Network Config > Security > Application Control > Rules Management**.\n7. Optimized controller security with built-in brute-force protection that locks login attempts after repeated password failures on \"managed by other\" devices **in Controller** (available now for AP & Gateway; Switch & OLT support planned for firmware 6.3).\n8. Optimized public OpenAPI documentation by completing deprecated-interface descriptions and correcting the categorization of site-template endpoints.\n\n**Bug Fixed**\n=============\n\n1. Fixed bug where RADIUS Message-Authenticator was not forcibly validated, which could lead to RADIUS protocol security vulnerability (CVE-2024-3596), by adding support for enforcing Message-Authenticator verification when the “Require Message-Authenticator” option is enabled, in **Site > Network Config > Profile > RADIUS Profile** and **Global/MSP > Settings > Server Settings > RADIUS Server.**\n2. Fixed bug where RADIUS packets containing the Proxy-State attribute did not enforce Message-Authenticator validation, potentially exposing the system to RADIUS protocol security vulnerability (CVE-2024-3596), by adding support for limiting Proxy-State and enforcing Message-Authenticator verification when the “Limit Proxy-State” option is enabled, in **Site > Network Config > Profile > RADIUS Profile** and **Global/MSP > Settings > Server Settings > RADIUS Server.**\n3. Fixed bug where adding a device via Device Key failed in certain scenarios. _This is the main modification to the newly provided pre-release version on Mar 27, 2026._\n\n**Notes**\n=========\n\n1. Please note that Controllers on different platforms may vary in features, even if their first three digits of the version code are the same. For example, the Linux Controller currently supports Cluster Mode, but the Windows Controller doesn't support it yet.\n2. The Omada SDN Controller can only manage specific devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.\n3. Since version 5.14.32, the Omada Software Controller no longer supports upgrading from Controller v4.\n4. To strengthen overall security, we recommend upgrading all devices to the latest firmware.\n\nFirmware Download\n=================\n\n### **Before the Upgrade**\n\n(1) Please be sure you have read the [Beta Test Agreement](https://community.tp-link.com/en/business/forum/topic/275514) before upgrading the Pre-release firmware!\n\n(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.\n\n(3) You may follow the following guide to upgrade your Omada Controller. **[How to Upgrade or Downgrade Omada SDN Controller](https://community.tp-link.com/en/business/forum/topic/616596).**\n\n### **Firmware Download Link**\n\n**Direct Download**\n\n**[OC200(UN)\\_V1\\_1.39.9\\_pre-release (Built-in Omada SDN Controller 6.2.0)](https://static.tp-link.com/upload/firmware/2026/202604/20260407/OC200v1_1.39.9%20Build%2020260401%20Rel.44730.zip)**\n\n**[OC200(UN)\\_V2\\_2.24.9\\_pre-release (Built-in Omada SDN Controller 6.2.0)](https://static.tp-link.com/upload/firmware/2026/202604/20260407/OC200v2_2.24.9%20Build%2020260401%20Rel.54513.zip)**\n\n**[OC200(UN)\\_V3\\_3.1.4\\_pre-release (Built-in Omada SDN Controller 6.2.0)](https://static.tp-link.com/upload/firmware/2026/202604/20260407/OC200v3_3.1.4%20Build%2020260401%20Rel.43897.zip)**\n\n**[OC220(UN)\\_V1\\_1.4.9\\_pre-release (Built-in Omada SDN Controller 6.2.0)](https://static.tp-link.com/upload/firmware/2026/202604/20260407/OC220v1_1.4.9%20Build%2020260401%20Rel.52825.zip)**\n\n**[OC220(UN)\\_V2\\_2.3.9\\_pre-release (Built-in Omada SDN Controller 6.2.0)](https://static.tp-link.com/upload/firmware/2026/202604/20260407/OC220v2_2.3.9%20Build%2020260331%20Rel.53308.zip)**\n\n**[OC300(UN)\\_V1\\_1.33.9\\_pre-release (Built-in Omada SDN Controller 6.2.0)](https://static.tp-link.com/upload/firmware/2026/202604/20260407/OC300v1_1.33.9%20Build%2020260401%20Rel.45256.zip)**\n\n**[OC400(UN)\\_V1\\_1.11.9\\_pre-release (Built-in Omada SDN Controller 6.2.0)](https://static.tp-link.com/upload/firmware/2026/202604/20260407/OC400v1_1.11.9%20Build%2020260331%20Rel.57071.zip)** \n \n\nOC200(UN)\\_V1\\_1.39.8\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC200(UN)\\_V2\\_2.24.8\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC200(UN)\\_V3\\_3.1.3\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC220(UN)\\_V1\\_1.4.8\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC220(UN)\\_V2\\_2.3.8\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC300(UN)\\_V1\\_1.33.8\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC400(UN)\\_V1\\_1.11.8\\_pre-release (Built-in Omada SDN Controller 6.2.0) \n \n\nOC200(UN)\\_V1\\_1.39.7\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC200(UN)\\_V2\\_2.24.7\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC200(UN)\\_V3\\_3.1.2\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC220(UN)\\_V1\\_1.4.7\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC220(UN)\\_V2\\_2.3.7\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC300(UN)\\_V1\\_1.33.7\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC400(UN)\\_V1\\_1.11.7\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\n### Additional Information\n\nIf somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:\n\n* **Omada Controller version** _(previous and current)_\n* **Device Model(s), Hardware and Firmware versions**\n* (if possible) A copy of the **Log file** and **Backup Config** **file**\n\nIf you decide to downgrade the controller before reporting the issue to TP-Link, it's recommended to save a copy of the current Log file and Backup Config file, which could help TP-Link investigate and address the problem quickly.\n\n\\>> How to get the **Log file** and **Backup Config file** for Omada SDN Controller:\n\n* If your Windows software controller failed to launch, please locate the controller installation path for the Log file.\n \n* If it's not a launch issue, you can export the Log file and Backup Config file to the local network.\n \n * For Omada Controller v5.8 or later version,\n \n In the **_Global View_**, go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. On the same page, scroll down to Export for Support, then click Export Running Logs to download the desensitized Log file.\n \n * For Omada Controller v5.6 or v5.7, \n \n Go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. On the same page, scroll down to Export for Support, then click Export Running Logs to download the desensitized Log file.\n \n * For Omada Controller v5.5 or a previous version,\n \n Go to **_Settings > Maintenance > Backup & Restore > Retained Data Backup_**, select **_Settings Only_,** then click **_Export_** for the Backup Config file. Go to **_Settings > Services > Export Data > Running Log_** to export the Log file.\n \n\nUpdate Log\n==========\n\n### Apr 9th, 2026\n\nClose this trail.\n\nUpdate the download links to the official ones.\n\n### Mar 27th, 2026\n\nUpdated the pre-release firmware.\n\nUpdated the release notes to add a new bug fix.\n\n### Mar 18th, 2026\n\nUpdated point 37 in the New Features section.\n\n### **Mar 13th, 2026**\n\nUpdated the pre-release firmware as follows:\n\nOC200(UN)\\_V1\\_1.39.7\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC200(UN)\\_V2\\_2.24.7\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC200(UN)\\_V3\\_3.1.2\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC220(UN)\\_V1\\_1.4.7\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC220(UN)\\_V2\\_2.3.7\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC300(UN)\\_V1\\_1.33.7\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC400(UN)\\_V1\\_1.11.7\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nUpdate Note:\n\nAdd one new feature: Point 37.\n\n### **Mar 4th, 2026**\n\nProvide the following firmware:\n\nOC200(UN)\\_V1\\_1.39.6\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC200(UN)\\_V2\\_2.24.6\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC200(UN)\\_V3\\_3.1.1\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC220(UN)\\_V1\\_1.4.6\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC220(UN)\\_V2\\_2.3.6\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC300(UN)\\_V1\\_1.33.6\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\nOC400(UN)\\_V1\\_1.11.6\\_pre-release (Built-in Omada SDN Controller 6.2.0)\n\n**Recommended Threads**\n=======================\n\n**[EAP7xx Fully Adapted to Omada 6.2 Pre-release Firmware (Released on 23rd Jan, 2026)](https://community.tp-link.com/en/business/forum/topic/855714)**\n\n**[Omada\\_Network\\_Application\\_V6.2.x.x Pre-Release Firmware (Released on 11th Feb, 2026)](https://community.tp-link.com/en/business/forum/topic/857494?moduleId=582)**\n\n**[ER7206 V2 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857562?moduleId=794)**\n\n**[ER707-M2 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857570?moduleId=794)**\n\n**[ER7406 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)](https://community.tp-link.com/en/business/forum/topic/857568?moduleId=794)**\n\n**[Omada SG\\_2 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 17th, 2026)](https://community.tp-link.com/en/business/forum/topic/859400?moduleId=3)**\n\n**[Omada S4500&5500 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 18th, 2026)](https://community.tp-link.com/en/business/forum/topic/860038?moduleId=3)**\n\n**[Omada SG\\_3 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 17th, 2026)](https://community.tp-link.com/en/business/forum/topic/859402?moduleId=3)**\n\nWish you a happy life and smooth network usage!  [\\>Omada US Enterprise Beta Program Launch<](https://community.tp-link.com/en/business/forum/topic/846442) [\\>Get the Latest Omada SDN Controller Releases Here<](https://community.tp-link.com/en/business/forum/topic/245226) [\\>Experience the Latest Omada EAP Firmware<](https://community.tp-link.com/en/business/forum/topic/616026)\n\nWish you a happy life and smooth network usage!  [Help Us Improve - Omada AP Installation Guide](https://community.tp-link.com/en/business/forum/topic/866618) [\\>Get the Latest Omada SDN Controller Releases Here<](https://community.tp-link.com/en/business/forum/topic/245226) [\\>Get the Latest Firmware Releases for Omada Routers Here<](https://community.tp-link.com/en/business/forum/topic/255644) [\\>Experience the Latest Omada EAP Firmware<](https://community.tp-link.com/en/business/forum/topic/616026)\n\n  1\n\nWe appreciate your feedback. Feel free to let us know more. Log in to submit feedback.\n\n     \n\n \n\n* [Facebook](https://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F859086)\n* [Linkedin](http://www.linkedin.com/shareArticle?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F859086)\n* [Twitter](http://twitter.com/share?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F859086)\n\n  1\n\nWe appreciate your feedback. Feel free to let us know more. Log in to submit feedback.\n\n     \n\n \n\n* [Facebook](https://www.facebook.com/sharer/sharer.php?u=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F859086)\n* [Linkedin](http://www.linkedin.com/shareArticle?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F859086)\n* [Twitter](http://twitter.com/share?url=https%3A%2F%2Fcommunity.tp-link.com%2Fen%2Fbusiness%2Fforum%2Ftopic%2F859086)","body_html":"
Hardware Controllers Omada SDN Controller 6.2.0 Pre-Release Firmware (Closed on 9th Apr, 2026)
2026-03-04 07:19:15 - last edited a week ago
Tags:\n

This Article Applies to

\n \n

OC200(UN)_V1_1.39.8_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC200(UN)_V2_2.24.8_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC200(UN)_V3_3.1.3_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC220(UN)_V1_1.4.8_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC220(UN)_V2_2.3.8_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC300(UN)_V1_1.33.8_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC400(UN)_V1_1.11.8_pre-release (Built-in Omada SDN Controller 6.2.0)

\n \n

Overview

\n \n

We hope to offer you the opportunity to experience the new features added in Controller v6.2.0.x in advance, and to allow TP-Link to thoroughly test the firmware in your real network environment and across scenarios before the official release. All feedback is welcome, including reports of successful upgrades.

\n \n

Release Notes

\n \n

Version Info

\n

This version of the Controller is fully compatible with the Omada App version 5.0.3 or above.

\n \n

Supported Device Models

\n

For device models Omada Software Controller supports, refer to the Omada Cloud SDN Platform Compatibility List.

\n \n

Added support for Access Points: Flex Bridge 5.

\n \n

New Features

\n \n
    \n
  1. Added support for configurable WAN-port PVID on gateways running firmware 6.2 in Devices > Gateway Details > Ports.
    2. \n
  2. Added support for FTP and SIP ALG settings, including editable FTP/SIP signaling ports, protocol type, peer-to-peer restriction, inactivity timers, and media timeout, for gateways on firmware 6.2 in Network Config > Transmission > NAT > ALG.
    3. \n
  3. Added support for e-mail alerts when new firmware is available in Firmware > Overview > Upgrade Settings: users can subscribe to any channel (default Stable) and receive automatic notifications whenever subscribed channels release new firmware images for devices on the controller, provided the mail server is configured
    4. \n
  4. Added support for a reorganized VPN management page in Network Config > VPN that unifies the entry workflow, maps legacy SSL VPN Server/User and WireGuard pages into the new structure, and expands WireGuard to server, client and auto site-to-site scenarios(requires Gateway 6.2 firmware).
    5. \n
  5. Added support for configuring multiple DHCP address ranges within a single VLAN in site - Network Config > LAN > VLAN (requires Gateway 6.2 firmware).
    6. \n
  6. Added support for allowing the number of local and remote subnets in VPN tunnels to scale to the limit advertised by the device firmware in Network Config > VPN > VPN (requires Gateway 6.2 firmware).
    7. \n
  7. Added support for IPv4-over-IPv6 dial-up modes of MAP-E and DS-Lite on WAN interfaces, including optional custom DS-Lite domain names, in Network Config > Network Settings > Internet.  Enabling these modes automatically activates IPv6. Some functions are not supported for DS-Lite and MAP-E dialing, including VPN, SD-WAN, IGMP, DDNS, UPnP, Disable NAT, Port Forwarding, and NAT ALG. (requires Gateway 6.2 firmware).
    8. \n
  8. Added support for a new DHCP User List page on the gateway that displays all active DHCP clients when the gateway operates as the DHCP server in Gateway Details > Network View > DHCP User List (requires Gateway 6.2 firmware).
    9. \n
  9. Added support for one-click creation of DHCP reservations from the DHCP User List, allowing administrators to import existing leases directly into the reservation table in Network Config > Transmission > DHCP Reservation > Add From DHCP User List.
    10. \n
  10. Added support for Hotspot Viewer accounts to print voucher codes directly from the voucher list in Hotspot > Vouchers > Voucher Groups.
    11. \n
  11. Added support for configurable DNS cache lifetime by adding a TTL setting to LAN DNS in Network Config > Network Settings > LAN - LAN DNS (requires Gateway 6.2 firmware).
    12. \n
  12. Added support for remote packet capture on gateway WAN ports or VLANs to aid network diagnostics in Network Tools > Packet Capture (requires gateway 6.2 firmware).
    13. \n
  13. Added support for rogue-DHCP-server detection: the gateway raises an alert whenever an unexpected DHCP server is detected on the LAN in Logs > Alerts (requires gateway 6.2 firmware).
    14. \n
  14. Added support for on-device DNS resolution to query domain-to-IP mappings directly from the gateway in Network Tools > Network Check > DNS Lookup (requires gateway 6.2 firmware).
    15. \n
  15. Added support for LAN-side IP-conflict detection; the gateway logs an alert whenever multiple MACs are detected using the same IP in Logs > Alerts (requires gateway 6.2 firmware).
    16. \n
  16. Added support for Timing-based link-back (failover): users can configure a time range after which traffic automatically fails back to the standby WAN, supplementing the existing failover modes in Site > Network Config > Network Settings > Internet (requires gateway 6.2 firmware).
    17. \n
  17. Added support for on-demand Speedtest in Site > Dashboard and scheduled Speedtest in Site > Network Config > Network Settings > Internet: initiate a test on any WAN or set daily/weekly/monthly schedules; results are graphed and stored historically (requires gateway 6.2 firmware).
    18. \n
  18. Added support for extending configurable VLANs up to 4094 on gateways, covering WAN, LAN, virtual-WAN and IPTV interfaces in Site > Network Config > Network Settings > Internet/LAN/IPTV (requires gateway 6.2 firmware).
    19. \n
  19. Added support for displaying the last-edit timestamp on each portal entry in Network Config > Authentication > Portal.
    20. \n
  20. Added support for showing voucher balance and quota-limit reminders on the portal post-auth success page, along with remaining session time and, if rate-limiting is enabled, remaining data for both voucher and local-user logins on the client success page after authentication.
    21. \n
  21. Added support for uploading separate background images for mobile and PC endpoints when creating or editing a portal in Network Config > Authentication > Portal > Add/Edit Portal > Design > Background > Unified Picture.
    22. \n
  22. Added support for using a hostname instead of an IP address for the RADIUS server in portal authentication in Network Config > Authentication > Portal.
    23. \n
  23. Added support for voucher statistics grouped by voucher group, letting administrators view usage totals per group in Hotspot > Vouchers > Statistics.
    24. \n
  24. Added support for LAN Network/VLAN columns in user tables, showing the network and VLAN where each client resides in Dashboard > Traffic > Clients and Insights > Application Analytics > Users.
    25. \n
  25. Added support for managing Pro/Campus devices within Omada Controller, enabling discovery, adoption, offline provisioning, site templates and mixed-mesh deployment, while health metrics, anomaly events and Heat-Map Pro models remain unavailable in Site > Device.
    26. \n
  26. Added support for displaying the timestamp and status of the latest GPS fix (manual or automatic) on EAP772-Outdoor in AP Details > Config > General (requires EAP772-Outdoor firmware 6.2).
    27. \n
  27. Added support for configuring a NAS-ID in switch 802.1X authentication in Network Config > Authentication > 802.1X (requires switch firmware 6.2).
    28. \n
  28. Added support for VLAN assignment when MAC-based authentication is selected in switch 802.1X in Network Config > Authentication > 802.1X (requires switch firmware 6.2).
    29. \n
  29. Added support for choosing hybrid mode (802.1X first, MAB on failure), displaying downstream devices on switch ports, and configuring a guest VLAN in Network Config > Authentication > 802.1X (requires switch firmware 6.2).
    30. \n
  30. Added support for transparent SSDP forwarding when both IGMP Snooping and unknown-multicast discard are active by introducing the \"Flood Known Protocols\" option in Network Config > Network Settings > LAN > Multicast Snooping (requires Switch 6.2 firmware).
    31. \n
  31. Added support for real-time LACP member-status indication: LAG list now shows green for successfully negotiated, up members and red for failed members, with failure logs sent by the switch and stored in the Controller in Switch Details > Ports > LAG List (requires Switch 6.2 firmware).
    32. \n
  32. Added support for in-place toggling between Active and Passive LACP modes without deleting and recreating the LAG; Static LAG mode remains unchanged in Switch Details > Ports > LAG Detail (requires Switch 6.2 firmware).
    33. \n
  33. Added support for displaying the last-known uplink device and uplink port columns in the device list, preserving this information even after the device goes offline in Devices > Device List.
    34. \n
  34. Added support for configuring multiple DHCP-relay server addresses on a Switch VLAN interface (quantity limited by hardware) in Switch Details > Config > VLAN Interface > DHCP Relay (requires Switch 6.2 firmware).
    35. \n
  35. Added support for VLAN-aware topology highlighting: links in the VLAN topology diagram now change color to indicate whether the selected VLAN’s traffic can traverse each connection in Network Config > Network Settings > LAN and Dashboard > Topology.
    36. \n
  36. Added support for SDM template integration, allowing administrators to view and modify SDM template options directly within switch device templates in Site Template > Device Template (switch) > Config > General > Others > SDM Template (requires Switch 6.2 firmware; supported models listed).
    37. \n
  37. Added support for cloud-based remote access (NAT traversal) that lets administrators reach HTTP/HTTPS services on private-LAN devices through a cloud-connected jump host, available for gateway 6.2 firmware and select switch/AP 6.2 builds in Network Tools > Remote Access and Client Details > Toolbox > Remote Access (Cloud Access must be enabled for Local Controller).
    38. \n
\n \n

Enhancements

\n \n
    \n
  1. Optimized the Internet page by moving Virtual WAN under Port Config and merging the separate Port Config and Load Balancing submit buttons into a single bottom action in Site > Network Config > Network Settings > Internet.
    2. \n
  2. Optimized Load Balancing logic to apply device-side settings when WAN Settings Overrides is disabled and added real-time port-status indicators under each WAN weight field to prevent user confusion in Site > Network Config > Network Settings > Internet > Load Balancing (requires gateway 6.2 firmware).
    3. \n
  3. Optimized Portal creation/editing with a rebuilt layout that groups settings more intuitively and exposes additional component-customization options in Network Config > Authentication > Portal.
    4. \n
  4. Optimized IP-input fields throughout the UI to accept a copied IP address pasted as a single string.
    5. \n
  5. Optimized Cloud Access with a redesigned connection flow that reduces cloud-request latency and improves overall user experience in Settings > Cloud Access.
    6. \n
  6. Optimized the DPI Rules Management page by replacing the single QoS toggle with a type selector that lets users choose between ACL and QoS rule types in Site > Network Config > Security > Application Control > Rules Management.
    7. \n
  7. Optimized controller security with built-in brute-force protection that locks login attempts after repeated password failures on \"managed by other\" devices in Controller (available now for AP & Gateway; Switch & OLT support planned for firmware 6.3).
    8. \n
  8. Optimized public OpenAPI documentation by completing deprecated-interface descriptions and correcting the categorization of site-template endpoints.
    9. \n
\n \n

Bug Fixed

\n \n
    \n
  1. Fixed bug where RADIUS Message-Authenticator was not forcibly validated, which could lead to RADIUS protocol security vulnerability (CVE-2024-3596), by adding support for enforcing Message-Authenticator verification when the “Require Message-Authenticator” option is enabled, in Site > Network Config > Profile > RADIUS Profile and Global/MSP > Settings > Server Settings > RADIUS Server.
    2. \n
  2. Fixed bug where RADIUS packets containing the Proxy-State attribute did not enforce Message-Authenticator validation, potentially exposing the system to RADIUS protocol security vulnerability (CVE-2024-3596), by adding support for limiting Proxy-State and enforcing Message-Authenticator verification when the “Limit Proxy-State” option is enabled, in Site > Network Config > Profile > RADIUS Profile and Global/MSP > Settings > Server Settings > RADIUS Server.
    3. \n
  3. Fixed bug where adding a device via Device Key failed in certain scenarios. This is the main modification to the newly provided pre-release version on Mar 27, 2026.
    4. \n
\n \n

Notes

\n \n
    \n
  1. Please note that Controllers on different platforms may vary in features, even if their first three digits of the version code are the same. For example, the Linux Controller currently supports Cluster Mode, but the Windows Controller doesn't support it yet.
    2. \n
  2. The Omada SDN Controller can only manage specific devices running the supported firmware. Please confirm that your device is compatible with the SDN Controller.
    3. \n
  3. Since version 5.14.32, the Omada Software Controller no longer supports upgrading from Controller v4.
    4. \n
  4. To strengthen overall security, we recommend upgrading all devices to the latest firmware.
    5. \n
\n \n

 

\n

Firmware Download

\n \n

Before the Upgrade

\n

(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!

\n

(2) For the sake of insurance, it's always recommended to save a copy of the controller Backup Config file before upgrading or downgrading.

\n

(3) You may follow the following guide to upgrade your Omada Controller. How to Upgrade or Downgrade Omada SDN Controller.

\n

 

\n

Firmware Download Link

\n \n

Direct Download

\n \n \n

OC200(UN)_V1_1.39.9_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC200(UN)_V2_2.24.9_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC200(UN)_V3_3.1.4_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC220(UN)_V1_1.4.9_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC220(UN)_V2_2.3.9_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC300(UN)_V1_1.33.9_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC400(UN)_V1_1.11.9_pre-release (Built-in Omada SDN Controller 6.2.0)
 

\n \n

OC200(UN)_V1_1.39.8_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC200(UN)_V2_2.24.8_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC200(UN)_V3_3.1.3_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC220(UN)_V1_1.4.8_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC220(UN)_V2_2.3.8_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC300(UN)_V1_1.33.8_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC400(UN)_V1_1.11.8_pre-release (Built-in Omada SDN Controller 6.2.0)
 

\n \n

OC200(UN)_V1_1.39.7_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC200(UN)_V2_2.24.7_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC200(UN)_V3_3.1.2_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC220(UN)_V1_1.4.7_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC220(UN)_V2_2.3.7_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC300(UN)_V1_1.33.7_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC400(UN)_V1_1.11.7_pre-release (Built-in Omada SDN Controller 6.2.0)

\n \n \n \n

Additional Information

\n \n

If somehow you encounter an issue during or after the controller upgrade, it's suggested to contact us with the following info:

\n \n \n

If you decide to downgrade the controller before reporting the issue to TP-Link, it's recommended to save a copy of the current Log file and Backup Config file, which could help TP-Link investigate and address the problem quickly.

\n \n

>> How to get the Log file and Backup Config file for Omada SDN Controller:

\n \n \n \n

Update Log

\n \n

 

\n

Apr 9th, 2026

\n

Close this trail.

\n

Update the download links to the official ones.

\n

 

\n

Mar 27th, 2026

\n

Updated the pre-release firmware.

\n

Updated the release notes to add a new bug fix.

\n \n

 

\n

Mar 18th, 2026

\n

Updated point 37 in the New Features section.

\n \n \n

Mar 13th, 2026

\n \n

Updated the pre-release firmware as follows:

\n \n

OC200(UN)_V1_1.39.7_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC200(UN)_V2_2.24.7_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC200(UN)_V3_3.1.2_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC220(UN)_V1_1.4.7_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC220(UN)_V2_2.3.7_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC300(UN)_V1_1.33.7_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC400(UN)_V1_1.11.7_pre-release (Built-in Omada SDN Controller 6.2.0)

\n \n

Update Note:

\n

Add one new feature: Point 37.

\n \n \n

Mar 4th, 2026

\n \n

Provide the following firmware:

\n

OC200(UN)_V1_1.39.6_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC200(UN)_V2_2.24.6_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC200(UN)_V3_3.1.1_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC220(UN)_V1_1.4.6_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC220(UN)_V2_2.3.6_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC300(UN)_V1_1.33.6_pre-release (Built-in Omada SDN Controller 6.2.0)

\n

OC400(UN)_V1_1.11.6_pre-release (Built-in Omada SDN Controller 6.2.0)

\n \n

Recommended Threads

\n \n

EAP7xx Fully Adapted to Omada 6.2 Pre-release Firmware (Released on 23rd Jan, 2026)

\n

Omada_Network_Application_V6.2.x.x Pre-Release Firmware (Released on 11th Feb, 2026)

\n

ER7206 V2 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

ER707-M2 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

ER7406 V1 Pre-Release Firmware for SDN Controller 6.2.X.X (Released on February 12th, 2026)

\n

Omada SG_2 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 17th, 2026)

\n

Omada S4500&5500 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 18th, 2026)

\n

Omada SG_3 Series Pre-Release FW for SDN Controller 6.2.X.X (Released on March, 17th, 2026)

\n \n \n \n

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<

\nWish you a happy life and smooth network usage! \nHelp Us Improve - Omada AP Installation Guide\n>Get the Latest Omada SDN Controller Releases Here<\n>Get the Latest Firmware Releases for Omada Routers Here<\n>Experience the Latest Omada EAP Firmware<
  1
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
     
 
  1
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
     
 
","link":"https://community.tp-link.com/en/business/forum/topic/859086","summary":"Hardware Controllers Omada SDN Controller 6.2 Pre-Release Firmware (Update on 13rd Mar, 2026)","type":"hardware","version":"6.2","platform":"unknown","date":"2026-03-13T00:00:00.000Z"}]